User Manual

Settings for the Entire FA
98
For the basic procedure for system settings,
refer to p. 97.
Pedal settings (Pedal)
Parameter Value Explanation
Control Pedal
Pedal Assign
Source
SYSTEM, STUDIO
Species whether the functions
controlled by the pedals connected to
the FOOT PEDAL CTRL 1 and 2 jacks
will be determined by the system
settings (SYSTEM) or by the studio set
settings (STUDIO).
Control Pedal 1
Assign
Control Pedal 2
Assign
Specify the functions that are controlled by pedals
connected to the FOOT PEDAL CTRL 1 and 2 jacks.
OFF No function is assigned.
CC01–31,
32 (OFF), 33–95
Controller number 1–31, 33–95
BEND DOWN
The same eect as moving the pitch
bend lever to the right.
BEND UP
The same eect as moving the pitch
bend lever to the left.
AFTERTOUCH Aftertouch
START/STOP Start/stop the song.
TAP TEMPO
The same eect as pressing the panel
[TAP] button.
STUDIO SET
DOWN
Switch the studio set to the previous
number.
STUDIO SET UP
Switch the studio set to the next
number.
FAVORITE DOWN
Switch the favorite to the previous
number.
FAVORITE UP
Switch the favorite to the next
number.
PANEL-DEC
The same eect as pressing the panel
[DEC] button.
PANEL-INC
The same eect as pressing the panel
[INC] button.
Control Pedal 1
Polarity
Control Pedal 2
Polarity
STANDARD,
REVERSE
Selects the polarity of the pedals
connected to the FOOT PEDAL CTRL 1
and 2 jacks.
Depending on the model of pedal,
the result of depressing or releasing
the pedal might be the opposite of
what you expect. If so, choose the
“REVERSE” setting. If you’re using
a Roland pedal (that has no polarity
switch), choose the “STANDARD”
setting.
Hold Pedal
Hold Pedal
Polarity
STANDARD,
REVERSE
Selects the polarity of the pedal
connected to the FOOT PEDAL HOLD
jack.
Depending on the model of pedal,
the result of depressing or releasing
the pedal might be the opposite of
what you expect. If so, choose the
“REVERSE” setting. If you’re using
a Roland pedal (that has no polarity
switch), choose the “STANDARD”
setting.
Continuous
Hold Pedal
OFF, ON
If this is ON, the FOOT PEDAL HOLD
jack will support half-pedaling. If
half-pedaling is enabled, you can
connect a damper pedal (such as the
DP-10; available separately) and use
the pedal to control subtle nuances of
the piano sounds you play.
[S1] [S2] button settings (S1/S2)
Parameter Value Explanation
S1/S2 Assign
Source
SYSTEM, STUDIO
Species whether the functions
controlled by the [S1] [S2] buttons will
be determined by the system settings
(SYSTEM) or by the studio set settings
(STUDIO).
Assignable
Switch S1
Assign
Switch S2
Assign
Specify the functions that are controlled by the [S1] [S2]
buttons.
OFF No function is assigned.
CC01–31, 32
(OFF), 33–95
Controller number 1–31, 33–95
AFTERTOUCH Aftertouch
MONO/POLY Switch between mono/poly.
CHORUS SWITCH Turn the chorus on/o.
REVERB SWITCH Turn the reverb on/o.
MASTER EQ
SWITCH
Turn the master EQ on/o.
TFX SWITCH Turn the total eect on/o.
MASTER KEY
DOWN
Lower the keyboard range by a
semitone.
MASTER KEY UP
Raise the keyboard range by a
semitone.
Switch S1
Assign Mode
Switch S2
Assign Mode
MOMENTARY,
LATCH
Specify the operation of the [S1] [S2]
buttons.