Owner`s manual

6
We’ll take you through these instructions in this booklet, so you can
close this window, or drag it over to the side of the screen if you want
to keep it open.
With the Fantom-G’s power turned off, plug one end of the included
7
USB cable into its USB COMPUTER jack, and the other end into the
USB jack you want to use on your computer.
Turn on the Fantom-G—after a few moments, the PC’s Found New
8
Hardware Wizard window appears.
If, instead of seeing the Found New Hardware window, you’re asked if
you want to connect to Windows Update, select No, not this time, and
then click Next to display the Found New Hardware window.
Click the button to the left of “Install the software automatically 9
(Recommended),” and then click Next to install the driver.
When the driver’s installed, the wizard announces the completion of
the installation process.
If the “Software installation” window appears after you click Next,
click Continue Anyway. If you can’t continue, see “About Driver Signing
Options” to the right of this page.
If the “System Settings Change” window appears, click Yes to restart
Windows.
Click Finish.10
Windows displays, “Your new hardware is ready to use.”
If the Driver Setup window’s still open, click its Close button.
11
Restart your computer.12
Should you ever need to remove the Fantom-G driver from your system,
the driver installer folder contains an uninstaller. You can hold onto
this file, or re-download the driver folder later should you need it.
About Driver-Signing Options
The Driver Signing window lets you select whether Windows should block
the installation of an unknown driver, warn you about it, or just install it.
In the Start menu, select Control Panel.
1
If you’re in2
Category View—• click Performance and Maintenance, and then
click System.
Classic View—
• double-click System.