Owner`s manual

8
If you want to install only one of the Fantom-G programs, make sure
it’s the only one that’s checked in this window.
In the Choose Destination Location window, you can select a 6
location on your hard drive for the Fantom-G software—if you
don’t have a specific reason to choose a different location, leave the
default location as is—and then click Next to display the Setup Type
window.
The installer displays your installation selections and tells you it’s now 7
ready to install the Fantom-G software. Click Next to proceed—the
files are installed.
Click Finish to exit the installer.
8
Windows Vista
Installing the Fantom-G USB Driver Software
Power up your PC with all USB cables disconnected except for your 1
keyboard and mouse. If any applications are running, quit them.
Double-click the Setup application in the Vista Drivers folder you’ve
2
downloaded and unzipped to start the installer.
If Vista tells you a program needs your permission to continue, click
Continue.
The Driver Setup window appears:3
Click Next to display the Driver Setup instructions window:4
Click Next.5
If Windows Security asks if you’d like to install this device software—6
as shown above—click Install.
If you plan to install other Roland drivers in the future, you can check
Always trust software from “Roland Corporation” to save time later.
The driver’s installed, and a window opens with instructions.