Owner`s manual

9
We’ll take you through these instructions in this booklet, so you can
close this window, or move it off to the side if you like.
With the Fantom-G’s power turned off, plug one end of the included
7
USB cable into its USB COMPUTER jack, and the other end into the
USB jack you want to use on your computer.
Turn on the Fantom-G—after a few moments, “Installing device
8
driver software” appears in the lower right corner of the screen.
When the PC’s finished installing the driver, it displays a message
9
telling you so.
Restart your computer.
10
Installing the Editor/Librarian Software
Here’s how to install the Fantom-G Editor and Librarian software. A single
installation can install them both.
Double-click the Fantom-G Editor Setup executable file. The installer
1
opens.
If Vista tells you a program needs your permission to continue, click
Continue.
Choose English as your setup language and click OK to display the 2
InstallShield Wizard window.
Click Next, read the License Agreement, and if you’d like to proceed, 3
click Yes.
Enter your name and decide whether to install the driver only for the
4
current user of your computer, or for all users, and then click Next.
Highlight the Custom installation, and then click Next.
5
Checkmark all of the files in the Select Features window—if they’re 6
not already checked—and then click Next.
If you want to install only one of the Fantom-G programs, make sure
its files are all that’s checked in this window.
Unless you have a reason to choose a different location, leave the 7
Choose Destination Location window set as it is and click Next.
When the installer displays your installation selections, click Next to
8
proceed—in a few moments, the files are installed.
Click Finish to exit the installer.
9