03896645 ’06-5-5N 転載することを禁じます。 © 2005 ローランド株式会社 本書の一部、もしくは全部を無断で複写・ 202 → Fantom-X をアップデートする必要はありません。 『主な特 長』(P.13)からお読みください。 Fantom-X(本体)をお買いあげのお客様 → 最初に Fantom-X をアップデートします。 『パッケージの 内容を確認する』(P.9)からお読みください。 Guide to the Added Functionality 「FANTOM-X Audio Track Expansion Kit」 (アップデート・ カード)をお買いあげのお客様 201a Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (p. 3; p. 4).
URUGUAY Zeelandia Music Center Inc. Orionweg 30 Curacao, Netherland Antilles TEL:(305)5926866 Todo Musica S.A. Francisco Acuna de Figueroa 1771 C.P.: 11.800 Montevideo, URUGUAY TEL: (02) 924-2335 POLAND MX MUSIC SP.Z.O.O. UL. Gibraltarska 4. PL-03664 Warszawa POLAND TEL: (022) 679 44 19 EASA HUSAIN AL-YOUSIFI & SONS CO. Abdullah Salem Street, Safat, KUWAIT TEL: 243-6399 PORTUGAL LEBANON Roland Iberia, S.L.
Fantom-X-V2_e.book 3 ページ 2006年4月13日 木曜日 午後5時24分 USING THE UNIT SAFELY The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly.
Fantom-X-V2_e.book 4 ページ 2006年4月13日 木曜日 午後5時24分 Important Notes 291a In addition to the items listed under “USING THE UNIT SAFELY” on page 3, please read and observe the following: Placement Handling CD-ROMs 354a 801 • Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Excessive heat can deform or discolor the unit.
Fantom-X-V2_e.book 5 ページ 2006年4月13日 木曜日 午後5時24分 Contents Check the contents of the package ...................................................... 8 Updating the Fantom-X .......................................................................... 9 What is the FANTOM-X Audio Track Expansion Kit? ......................................... 9 Items required for performing the update.............................................................. 9 Cautions when performing the update (Important) .................
Fantom-X-V2_e.book 6 ページ 2006年4月13日 木曜日 午後5時24分 Contents Using the Skip Back Sampling function............................................. 27 What is Skip Back Sampling?.................................................................................. 27 Using Skip Back Sampling....................................................................................... 27 Editing the data created by Skip Back Sampling .................................................
Fantom-X-V2_e.book 7 ページ 2006年4月13日 木曜日 午後5時24分 Contents Changes due to the upgraded editor software .................................. 42 Newly added PC mode screen................................................................................ 42 Cautions when using S-700 series sounds with the Fantom-X .......................... 42 Before you connect the Fantom-X to your computer ................................... 42 Importing patches and rhythm sets .................................................
Fantom-X-V2_e.book 8 ページ 2006年4月13日 木曜日 午後5時24分 Check the contents of the package This package contains the following items. As soon as you open the package, please make sure that all items are present. You may wish to check off ( item. If anything is missing, please contact your dealer. ) each box as you verify each * This page is for verifying the contents of the FANTOM-X Audio Track Expansion Kit (update card).
Fantom-X-V2_e.book 9 ページ 2006年4月13日 木曜日 午後5時24分 Updating the Fantom-X What is the FANTOM-X Audio Track Expansion Kit? The FANTOM-X Audio Track Expansion Kit consists of a CompactFlash card containing an upgrade program that adds audio tracks to your Fantom-X and enhances the multisample functionality, together with a PC card adapter for inserting this card into your Fantom-X.
Fantom-X-V2_e.book 10 ページ 2006年4月13日 木曜日 午後5時24分 Updating the Fantom-X Update procedure 1. Insert the “FANTOM-X Audio Track Expansion Kit” CompactFlash card into the PC card adapter. 2. Make sure that your Fantom-X is switched OFF. 3. Insert the PC card adapter (see step 1) into the Fantom-X. 4. Switch ON the power on your Fantom-X. fig.05-01 PC Card Adapter CompactFlash After the opening movie is displayed, a caution regarding the update procedure will appear.
Fantom-X-V2_e.book 11 ページ 2006年4月13日 木曜日 午後5時24分 Updating the Fantom-X 6. Press [F8 (UPDATE)] to execute the update. * If you wish to abort the update procedure at this point, press [F1 (EXIT)], turn off the power, and remove the PC card. * Do not turn off the power while the update is in progress. * The update will require approximately two minutes for completion. 7. When the process has been completed, the following screen will appear. Turn off the power of the Fantom-X and remove the PC card. fig.
Fantom-X-V2_e.book 12 ページ 2006年4月13日 木曜日 午後5時24分 Main features The Fantom-X Audio Track Expansion adds audio tracks, providing a significant leap in music-making power. With its comprehensive unification of synth, sampler, and audio functionality, the Fantom-X is reborn as an even more powerful music workstation. Audio tracks (p. 13) Eight dedicated audio tracks (stereo) have been added to the sequencer of the Fantom-X series. This lets you use recorded or imported audio phrases directly in your songs.
Fantom-X-V2_e.book 13 ページ 2006年4月13日 木曜日 午後5時24分 Using audio tracks What are audio tracks? Eight dedicated audio tracks (stereo) have been added to the sequencer of the Fantom-X series. This lets you use recorded or imported audio phrases directly in your songs. The audio tracks are “time-stretched” so that they will stay in synchronization even if the tempo changes during the song. The audio tracks can also be played back from midway through an event. fig.02-01.e Song structure Sample MIDI Tracks (.
Fantom-X-V2_e.book 14 ページ 2006年4月13日 木曜日 午後5時24分 Using audio tracks You will use the following two screens to edit audio tracks. • Audio Track Edit screen Here you can edit each audio track. • Audio Track Mixer screen In this screen you can adjust the mixing of the audio tracks, such as their level and pan. To access the Audio Track Mixer screen 1. With the Audio Track Edit screen displayed, press [F1 (Audio Mixer)]. The Audio Track Mixer screen will appear. fig.
Fantom-X-V2_e.book 15 ページ 2006年4月13日 木曜日 午後5時24分 Using audio tracks Items in the Audio Track Edit screen fig.02-11.e Audio Track Edit Screen 2 3 1 If you hold down [SHIFT] 4 5 6 7 9 8 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1. Indicates the name of the currently selected song, the measure location, and the status of the sequencer. 2. Indicates the current location of the audio track. 3. Audio level meter. 14. Opens the Loop/Locate window (p. 17). 4.
Fantom-X-V2_e.book 16 ページ 2006年4月13日 木曜日 午後5時24分 Using audio tracks Editing audio tracks (Audio Track Edit screen) Moving a sample event (Move) Selecting and auditioning a sample event (Preview) 1. Use 2. Press [ENTER]. The sample in the track you selected in step 1 that is closest to the current location will be selected. While the play is stopped, you can audition (preview) the sample by continuing to hold down [ENTER].
Fantom-X-V2_e.book 17 ページ 2006年4月13日 木曜日 午後5時24分 Using audio tracks 2. Viewing a list of markers (Marker List) You can assign markers to desired measures within a song. This gives you a visual indication of the structure of your song, and is a real convenience when editing audio tracks since you can move rapidly to a desired marker. Here’s how you can view a list of the markers in the song, and edit the markers. Press [F8 (Close)] to close the window.
Fantom-X-V2_e.book 18 ページ 2006年4月13日 木曜日 午後5時24分 Using audio tracks Deleting the selected sample event from an audio track (Delete) 1. Use [CURSOR] to select the sample event that you want to delete from an audio track. 2. Press [F7 (Delete)]. The selected sample event will be deleted from the track. * This merely deletes the sample event; the sample data itself will remain in the sample list.
Fantom-X-V2_e.book 19 ページ 2006年4月13日 木曜日 午後5時24分 Using audio tracks 3. Press [PLAY] or [F8 (Start)]. The Mixdown Standby window will close, and [REC] indicator will change from blinking to lit, and the mixdown will begin. When the mixdown begins, the Mixdown window will appear. fig.02-xx_40 Erasing audio tracks (Clear) 1. Hold down [SHIFT] and press [F2 (Clear)]. The Audio Track Clear Menu window appears. fig.02-xx_40 To close the Mixdown window, press [F8 (Close)] or [PLAY].
Fantom-X-V2_e.book 20 ページ 2006年4月13日 木曜日 午後5時24分 Using audio tracks • Overview Mode Displays the contents of the song in a “condensed” form that lets you view all of the audio tracks. This is a convenient way to view the overall structure of the song. Naming an audio track (Track Name) Here’s how to assign a name to an audio track (you can use up to twelve characters). 1. Use to select the audio track that you want to name. 2. Hold down [SHIFT] and press [F3 (Track Name)]. fig.
Fantom-X-V2_e.book 21 ページ 2006年4月13日 木曜日 午後5時24分 Using audio tracks Items in the Audio Track Mixer screen fig.02-12 Audio Track Mixer1 Screen 2 Audio Track Mixer2 Screen 1 2 3 5 4 1 3 5 4 7 6 8 9 10 11 12 13 14 7 6 8 9 10 11 12 13 14 1. Indicates the name of the currently selected song, the measure location, and the status of the sequencer. 11. Lets you use the pads to mute audio tracks (p. 16). 2.
Fantom-X-V2_e.book 22 ページ 2006年4月13日 木曜日 午後5時24分 Using audio tracks Audio Track Mixer 1 Screen Controlling the audio tracks (Audio Track Mixer screen) It's convenient to use the Audio Track Mixer screen when you want to adjust mixing parameters, such as the level and pan of the eight audio tracks. Controlling the audio track settings 1. Access the Audio Track Mixer 1 or 2 screen. 2. Use to move the cursor to the parameter you want to edit. 3.
Fantom-X-V2_e.book 23 ページ 2006年4月13日 木曜日 午後5時24分 Using audio tracks Audio Track Mixer 2 Screen Indication in the Mixer screen S M Output Assign Key Parameter Solo Switch Plays only the specified audio track. Value: ON, OFF Mute Switch Mutes (silences) the specified audio track. Value: ON, OFF Output Assign Specifies how the direct sound from each audio track will be output. Value MFX 1–3: The sound will be routed through the multieffect and output in stereo.
Fantom-X-V2_e.book 24 ページ 2006年4月13日 木曜日 午後5時24分 Using audio tracks • AUDIO MERGE Multiple audio tracks will be combined into one audio track. For details, refer to “Combining multiple audio tracks into one track (AUDIO MERGE)” (p. 25). Recording an audio track Owner’s Manual; p. 168 3. Recording an audio track (SOLO/RE-SAMPLING) Here’s how to record the input from an AUDIO INPUT jack or from the internal sound generator. 1.
Fantom-X-V2_e.book 25 ページ 2006年4月13日 木曜日 午後5時24分 Using audio tracks 5. When you’ve finished recording, press [STOP]. The [REC] indicator will go dark. 6. The Audio Rec Sample Assign window will open. fig.02-29_40 Use [RESET][BWD][FWD] or [CURSOR] to specify the location to which the sample event is to be assigned. 7. Press [F8 (Assign)] to assign the sample event to the audio track.
Fantom-X-V2_e.book 26 ページ 2006年4月13日 木曜日 午後5時24分 Using audio tracks When recording starts, the Audio Recording window will appear. fig.02-28_40 To close the Audio Recording window, press [F8 (Close)] or [PLAY]. To open it once again, press [PLAY]. 6. Saving your audio tracks When you save a song that contains audio tracks, the audio track data is automatically saved in a file with a filename extension of “.SVA” and the same name as the song, together with the identically named “.SVQ” data file.
Fantom-X-V2_e.book 27 ページ 2006年4月13日 木曜日 午後5時24分 Using the Skip Back Sampling function What is Skip Back Sampling? Skip Back Sampling is a function that lets you sample what were playing immediately prior to that point, even if you were not recording. When you press the SKIP BACK SAMPLING button, the performance that you were playing for a certain length of time before that moment will be sampled.
Fantom-X-V2_e.book 28 ページ 2006年4月13日 木曜日 午後5時24分 Using the Skip Back Sampling function Editing the data created by Skip Back Sampling In the Skip Back Preview screen, you can isolate just the desired portion of the sample, and assign it to the keyboard or to an audio track. Isolating the desired portion of the sampled data (Start Beat/End Beat) 1. In the Skip Back Preview screen, use [F1]–[F4] to isolate the desired portion of the sample. The buttons have the following functions.
Fantom-X-V2_e.book 29 ページ 2006年4月13日 木曜日 午後5時24分 Using the Skip Back Sampling function Assigning the sampled waveform to an audio track (Assign to Audio Track) 1. In the Skip Back Preview screen, press [F7 (Assign Audio)]. The Audio Track Edit screen will appear, and the Skip Back Sample Assign window will open. fig.08-04_40 Use [RESET][BWD][FWD] or [CURSOR] to specify the location at which the sample is to be assigned. 2. Press [F8 (Assign)] to assign the sample to a track. 3. Press [F8 (Exec)].
Fantom-X-V2_e.book 30 ページ 2006年4月13日 木曜日 午後5時24分 Multisample editing functions Owner’s Manual; p. 153 The FANTOM-X Audio Track Expansion adds a Multisample Edit screen that makes it easy to create and edit multisamples. Creating a multisample A “multisample” is a set of different samples assigned to the notes of the keyboard. One multisample can split up to 128 samples across the keyboard. You can store 128 multisamples in user memory, and another 128 multisamples in a memory card.
Fantom-X-V2_e.book 31 ページ 2006年4月13日 木曜日 午後5時24分 Multisample editing functions Creating a multisample in the Patch Edit screen Creating a multisample in the Create Multisample screen 1. You should start by initializing the patch settings. (Owner’s Manual; p. 57) 1. Press [PATCH/RHYTHM] to get the Patch Play screen. Press [F5 (Mark Set)] to assign a check mark (✔) to the desired sample or samples. You can press [F4 (Mark Clear)] to remove the check mark.
Fantom-X-V2_e.book 32 ページ 2006年4月13日 木曜日 午後5時24分 Multisample editing functions 4. When you’ve finished inputting the name, press [F8 (Write)]. 8. A screen will appear, allowing you to select the write destination. fig.04-13_40 When the multisample has been written, the Assign to Keyboard window will appear. fig.04-11_40 5. Turn the VALUE dial or use [INC][DEC] to select the write destination.
Fantom-X-V2_e.book 33 ページ 2006年4月13日 木曜日 午後5時24分 Multisample editing functions Editing a multisample About the Multisample Edit screen fig.04-20.e Multisample Edit Screen 1 If you hold down [SHIFT] 3 2 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 2. Shows the name of the multisample. 11. Specifies the original key of the sample (p. 37). 3. Indicates whether the multisample has been edited. 12. Opens the Tone Switch/Select window (p. 35). 4. Shows information about the current note. 13.
Fantom-X-V2_e.book 34 ページ 2006年4月13日 木曜日 午後5時24分 Multisample editing functions Selecting the notes to edit 1. Press the keyboard to select the sample you want to edit. Erasing the data from the selected region of notes (Erase) 1. You can select a region by pressing two notes. In the Multisample Edit screen, press [F2 (Erase)]. The data for the selected region of notes will be erased. You can also make your selection by turning the VALUE dial, by using , or by using [INC][DEC].
Fantom-X-V2_e.book 35 ページ 2006年4月13日 木曜日 午後5時24分 Multisample editing functions Copying a sample from a key to another key (Copy) Here’s how the sample assigned to a note can be copied to a different note of the keyboard. 1. In the Multisample Edit screen, press the key to which the copy-source sample is assigned. Opening the Tone Switch/Select window (Tone Sw/Sel) 1. In the Multisample Edit screen, press [F6 (Tone Sw/Sel)]. The Tone Switch/Select window will open. fig.
Fantom-X-V2_e.book 36 ページ 2006年4月13日 木曜日 午後5時24分 Multisample editing functions Returning a multisample to the last-written state (Reload) Replacing the sample of the current zone (Sample Select) Here’s how you can return the currently edited multisample to the state in which it was last written. A “zone” is a region to which the same sample is assigned. Here's how to assign a sample to the currently selected zone (the “current zone”). 1.
Fantom-X-V2_e.book 37 ページ 2006年4月13日 木曜日 午後5時24分 Multisample editing functions 2. Specify the original key (Org Key) of the sample Samples you record or import are set so that they will play at their original pitch when you press the C4 note. In order to correctly match the key of the sample to the keyboard, you must modify the “original key” of the sample.
Fantom-X-V2_e.book 38 ページ 2006年4月13日 木曜日 午後5時24分 Multisample editing functions 3. Saving a multisample Once you’ve edited a multisample, the word “EDITED” appears beside the multisample name. Be aware that if you turn off the power or select another screen when the “EDITED” indication is shown, the changes you made to the multisample will be lost. When you’ve finished inputting a name, press [F8 (Write)]. The Multisample Write window will appear. fig.04-34_40 fig.04-32 1.
Fantom-X-V2_e.book 39 ページ 2006年4月13日 木曜日 午後5時24分 Sample-related changes Extended patch groups You can now select samples (card/user) from the patch list as well (Sample Auto Patch). This allows you to play a sample in a pitched manner just as you would play a normal patch. fig.03-00 fig.03-01 * In the case of a stereo sample, choose the sample number for the L channel. It will play as a stereo patch.
Fantom-X-V2_e.book 40 ページ 2006年4月13日 木曜日 午後5時24分 Sample-related changes Newly added sample parameters The following sample parameters have been added. Sample BPM calculator (BPM Calc) Here’s how to specify the original tempo of the sample. 1. Owner’s Manual; p. 150 In the Sample Prm screen, press [F6 (BPM Calc)] to open the BPM Calculator window. fig.03-02 fig.03-03_40 • Sample Gain This adjusts the gain of the sample, letting you boost the volume if it decreased in the process of sampling.
Fantom-X-V2_e.book 41 ページ 2006年4月13日 木曜日 午後5時24分 Changes in the Patch/Rhythm Edit screen The behavior that occurs when you press [PATCH EDIT] has changed; the screen that was formerly called the Zoom Edit screen (Owner’s Manual; p. 57, p. 84) will now appear first. fig.05-01_40 Newly added Patch Overview screen You can now use the REALTIME CONTROL knobs to edit a patch. • Patch Edit fig.
Fantom-X-V2_e.book 42 ページ 2006年4月13日 木曜日 午後5時24分 Changes due to the upgraded editor software The included “Fantom-X Editor” software has been upgraded, allowing you to use an editor program to edit samples and multisamples. Newly added PC mode screen In conjunction with the addition of the sample editor, a PC mode screen has been added to the Fantom-X. When you start up the sample editor, the Fantom-X will automatically enter PC mode, and will be inoperable using its own controls.
Fantom-X-V2_e.book 43 ページ 2006年4月13日 木曜日 午後5時24分 Changes due to the upgraded editor software 4. Importing patches and rhythm sets The Fantom-X will check whether there are any files that can be imported. If such files are found, the User and/or Card icons will appear. Turn the VALUE dial or use [INC][DEC] or to choose whether you want to import from User or from Card. * If there is no data that can be imported, these icons will not appear.
Fantom-X-V2_e.book 44 ページ 2006年4月13日 木曜日 午後5時24分 Changes due to the upgraded editor software 8. STEP 5 will appear. This screen shows details about the patch being imported. fig.06-04_40 10. When the import is completed, you are asked whether you can delete the source files located in the User or Card PATCH_IMPORT directory. Press [F8 (Exec)] to delete the files. (To cancel, press [F7 (Cancel)].) * It may take some time for files to be deleted.
Fantom-X-V2_e.book 45 ページ 2006年4月13日 木曜日 午後5時24分 Changes due to the upgraded editor software Fantom-X Editor System Requirements If you’re using Fantom-X Editor version 2.1 or later, please refer to the following. System Requirements (Windows) • Operating System Microsoft® Windows® 2000 Professional Microsoft® Windows® XP System Requirements (Mac OS) • Operating System Mac OS X 10.
Fantom-X-V2_e.book 46 ページ 2006年4月13日 木曜日 午後5時24分 Other changes Changes in the Patch Edit screen Due to the newly added Multisample Edit screen, the following buttons in the Patch Edit screen have changed. • Newly added [F4 (Util Menu)] The previous [F4 (Init)] and [F5 (Tone Copy)] have been moved to a menu. (Example) When you have pressed [F4 (Util Menu)] to open the Patch Utility Menu window fig.07-23_40 The method for displaying the Patch Edit screen has changed.
Fantom-X-V2_e.book 47 ページ 2006年4月13日 木曜日 午後5時24分 Other changes Changes in the Performance Mixer screen Changes in the Performance Layer screen [F5]–[F8] buttons have been added to the screen that appears when you press [SHIFT] in the Performance Mixer screen. [F5]–[F8] buttons have been added to the screen that appears when you press [SHIFT] in the Performance Layer screen. After the update After the update fig.07-35 fig.07-36 These buttons have the following functions.
Fantom-X-V2_e.book 48 ページ 2006年4月13日 木曜日 午後5時24分 Other changes Changes in the Key Range window Changes in the Song Edit screen In the Performance Layer screen, you can press [F3 (Key Range)] to open the Key Range window and make split settings in this window. Due to the addition of the audio tracks, the following buttons in the Song Edit screen have changed. Before the update fig.07-25 Owner’s Manual; p. 102 Playing different sounds across the keyboard (Split) 1.
Fantom-X-V2_e.book 49 ページ 2006年4月13日 木曜日 午後5時24分 Other changes Changes in the Song List screen Using the pads for realtime erase Due to the new addition of audio tracks, the contents displayed in the Song List screen have changed. Owner’s Manual; p. 177 fig.07-40_40 Owner’s Manual; p. 173 While realtime-recording a song, you can now use the pads to erase data that you input from the pads. 1. Begin realtime recording (Owner’s Manual; p. 170). The Realtime Recording window will appear. fig.
Fantom-X-V2_e.book 50 ページ 2006年4月13日 木曜日 午後5時24分 Other changes CC Filter added to the Microscope You can now specify the controller numbers that will be shown in the Microscope. Improved functionality for step recording A function that enables you to remove a previously input Tie has been added. In the Step Rec (Note) screen, press [F6 (Untie)]. Owner’s Manual; p. 194 fig.07-03 Owner’s Manual; p. 174, step 7. fig.07-04_40 1. Access the View Select window. 2. Press or Change.” 3.
Fantom-X-V2_e.book 51 ページ 2006年4月13日 木曜日 午後5時24分 Other changes 5. Improved functionality in Live Setting Press [F5 (Set Song)]. The Song Select screen will appear. fig.07-39_40 Owner’s Manual; p. 42 Registering a song file in a Live Setting In addition to patches and performances, you can now register song files to a live setting. 1. Press [MENU]. 2. Turn the VALUE dial or use or to select “Live Setting Edit,” and then press [ENTER].
Fantom-X-V2_e.book 52 ページ 2006年4月13日 木曜日 午後5時24分 Other changes Recalling a song file you registered Improvements in Arpeggio functionality You can recall a song in the same way that you recall a patch or performance. (Owner's manual p. 42) When playing arpeggios, you can now use the pads to switch arpeggio styles. In the Live Setting Play screen, when you recall a step for which a song has been registered, that song will be loaded. Using the pads to switch arpeggio styles Owner’s Manual; p.
Fantom-X-V2_e.book 53 ページ 2006年4月13日 木曜日 午後5時24分 Other changes Changing the arpeggio styles assigned to the pads 1. In the above window, use [CURSOR] to move the cursor to “Style,” and turn the VALUE dial or use [INC][DEC] to select the desired style. fig.07-41_40 Improvements in Chord Memory functionality When using chord memory, you can now use the pads to switch chord forms. Using the pads to switch chord forms Owner’s Manual; p. 133 1. 2. 3. A screen like the following will appear.
Fantom-X-V2_e.book 54 ページ 2006年4月13日 木曜日 午後5時24分 Other changes Changing the chord forms assigned to the pads 1. In the above window, use [CURSOR] to move the cursor to “Chord Form,” and turn the VALUE dial or use [INC][DEC] to select the desired chord form. fig.07-42_40 Changes in the librarian Owner’s Manual; p. 236 When using the Fantom-X librarian, you no longer need to manually select Librarian mode.
Fantom-X-V2_e.book 55 ページ 2006年4月13日 木曜日 午後5時24分 Other changes New shortcut from the Input Setting screen to MFX Edit In the Input Setting screen, [F6 (MFX Edit)] has been added to let you jump to the MFX Edit screen by pressing a single button. New parameters available for the assignable switches Several more choices have been added to the functions that can be controlled by the assignable switches 1 and 2. The newly added parameters are listed below. Owner’s Manual; p. 141 fig.
Fantom-X-V2_e.book 56 ページ 2006年4月13日 Other changes Newly added DIMM check function When you power up the Fantom-X, it will automatically check whether the DIMM memory (Owner’s Manual; p. 242) is operating correctly. If the DIMM contacts are faulty, a screen like the following will appear. fig.07-32_40 If this occurs, turn off the power immediately, and re-insert the DIMM memory correctly.
Fantom-X-V2_e.book 57 ページ 2006年4月13日 木曜日 午後5時24分 Index A D Arpeggio .................................................... 52 Assign Multisample ......................................... 34 Assignable Switch ...................................... 55 AUDIO MERGE ......................................... 25 Audio Track ............................................... 13 Display Mode ...................................... 20 Editing ................................................. 16 Erasing ...............
Fantom-X-V2_e.book 58 ページ 2006年4月13日 木曜日 午後5時24分 Index M R Marker Viewing a List ...................................... 17 Marker List ................................................ 17 MFX Edit Screen ......................................... 55 Mixdown .................................................... 18 Audio Track ......................................... 18 Mixer Controling ........................................... 23 Move ....................................................
Fantom-X-V2_e.book 59 ページ 2006年4月13日 木曜日 午後5時24分 Index SOLO/RE-SAMPLING .............................. Song ........................................................... Song Edit Screen ........................................ Song File Live Setting .......................................... Song List screen ......................................... Sort Multisample ......................................... Split Point .................................................. Multisample ........................
Fantom-X-V2_e.