Specifications
A Distorted Blast from the Past
● Vintage sounds inspired by
famous fuzz pedals of the ’60s
and ’70s
● Uses advanced COSM technology
to recreate classic fuzz
● BOOST control for more
aggressive tone
● Road-tough BOSS metal
construction
*All product names mentioned in this catalog are trademarks or
registered trademarks of their respective owners. In this catalog,
their names are used solely to identify the equipment whose
sound is simulated by COSM.
*Actual product appearance may be subject to change.
The FZ-5 is a modern pedal built for the modern guitarist, but the sounds you can get from the FZ-5 are pure
retro. Looking back at the glorious rock sounds of the ’60s and ’70s, the FZ-5 recreates its vintage fuzz through
BOSS state-of-the-art COSM
®
technology. Recall the fuzz-filled flavors of classic pedals such as the Maestro
FZ-1A, Fuzz Face, and Octavia pedals, and kick ’em into overdrive with the FZ-5’s Boost knob. BOSS' proprietary
COSM technology allows guitar players to recreate classic fuzz BOOST control for more aggressive tone. The
FZ-5 is the perfect weapon for players wanting to beef up their rigs with classic retro fuzz artillery.
12 13
An Overdrive Pedal that Reacts to You
● Provides dynamic transition
between clean to heavy overdrive
based on picking strength and/or
guitar volume
● Acclaimed Dyna Amp technology
derived from Roland’s CUBE-60
● A unique way for guitarists to add
expression to their performance
● Road-tough BOSS metal
construction
*Actual product appearance may be subject to change.
The DN-2 is an exciting new type of overdrive pedal that reacts to the intensity of your performance. This
unique BOSS pedal comes equipped with the acclaimed Dyna Amp technology recently introduced in
Roland’s popular CUBE-60 amp, letting you create unique tone transitions based on picking dynamics. It's
possible to get a transparent clean output sound by playing softly, or a powerful heavy overdrive sound by
picking aggressively.
DN-2 Specifications
■ Nominal Input Leve -20 dBu ■ Input Impedance 1 MΩ ■ Nominal Output Level -20 dBu ■ Output
Impedance 1 kΩ ■ Recommended Load Impedance 10 kΩ or greater ■ Controls Pedal Switch, LEVEL
Knob, TONE Knob, DRIVE Knob ■ Indicator CHECK Indicator (Serves also as battery check indicator)
■ Connectors INPUT Jack, OUTPUT Jack, AC adaptor Jack ■ Power Supply DC 9 V: Dry battery 6F22 (9
V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional) ■ Current Draw
36 mA (DC 9 V) ■ Expected battery life under continuous use Carbon: 3 hours, Alkaline: 10 hours
■ Dimensions 73 (W) x 129 (D) x 59 (H) mm, 2-7/8 (W) x 5-1/8 (D) x 2-3/8 (H) inches ■ Weight 440 g/ 1 lb
(including battery) ■ Accessories Owner's Manual, Leaflets (USING THE UNIT SAFELY, IMPORTANT
NOTES, and Information), Dry Battery 006P/9V (6LR61) ■ Options AC Adaptor (PSA series)
* The battery that was supplied with the unit is for temporary use - intended primarily for testing its operation.
* We recommend that alkaline battery be used when replacing the battery.
* 0 dBu= 0.775 Vrms
* The specifications are subject to change without notice.
FZ-5 Specifications
■ Nominal Input Level -20 dBu ■ Input Impedance 1 MΩ ■ Nominal Output Level -20 dBu ■ Output
Impedance 1 kΩ ■ Recommended Load Impedance 10 kΩ or greater ■ Controls Pedal Switch, LEVEL
Knob, FUZZ Knob, MODE Knob ■ Indicator CHECK Indicator (Serves also as battery check indicator)
■ Connectors INPUT Jack, OUTPUT Jack, AC adaptor Jack ■ Power Supply DC 9 V: Dry battery 6F22 (9
V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional) ■ Current Draw
36 mA (DC 9 V) ■ Expected battery life under continuous use Carbon: 3 hours, Alkaline: 10 hours
■ Dimensions 73 (W) x 129 (D) x 59 (H) mm, 2-7/8 (W) x 5-1/8 (D) x 2-3/8 (H) inches ■ Weight 440 g/ 1 lb
(including battery) ■ Accessories Owner's Manual, Leaflets (USING THE UNIT SAFELY, IMPORTANT
NOTES, and Information), MODE sticker, Dry Battery 006P/9V (6LR61) ■ Options AC Adaptor (PSA series)
* The battery that was supplied with the unit is for temporary use - intended primarily for testing its operation.
* We recommend that alkaline battery be used when replacing the battery.
* 0 dBu=0.775 Vrms
* The specifications are subject to change without notice.