User`s manual

2 Basic Operation

- When transparent material is loaded, it is necessary to set [SHEET TYPE] to [CLEAR]. For more information, see

"4-6 What to Do If..." ( [SHEET SET ERROR SET AGAIN] appears and the material cannot be detected even

when the [SETUP] key is pressed).

- When loading thicker material or material that is prone to warping, it may be necessary to adjust the head height.

For more information, see "4-2 Adjusting the Height of the Printing Head."

- When changing to a different type of material, it may be necessary to perform feed correction or bidirectional

correction. For more information, see "2-5 Printing -- Making Corrections for Printing."

- If the sides of the material have warped, then bend back the warp or feed the warped portion to the front and

perform setup again. Attempting to print with warped material may scrape the printing heads or cause the material

to jam. If the printing heads become damaged or soiled as a result, printing accuracy may suffer.