Owner's Manual Digital Piano FP-2
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Contents
- Panel Descriptions
- Before You Play
- Chapter 1 Playing the Keyboard
- Listening to Demo Songs
- Listening to Internal Songs
- Performing with a Variety of Sounds
- Performing With Two Layered Tones (Dual Play)
- Performing With Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Changing the Volume Balance for Dual Play and Split Play
- Changing the Keyboard’s Touch
- Adding Reverberation to Sounds (The Reverb Effect)
- Adding a Variety Effects to the Sound
- Transposing the Key of the Keyboard (Key Transpose)
- Using the Metronome
- Boosting the Low-Frequency Range (Sound Control)
- Changing the Tonal Quality (Equalizer)
- Chapter 2 Playing Along with Rhythms
- What is Session Partner?
- Performing Along With Session Partner
- Selecting a Rhythm
- Changing a Rhythm’s Tempo
- Selecting a Rhythm’s Chord Progression
- Performing With the Chord Progression Specified in the Left Hand (Chord Progression off)
- Recording the Chord Progression (Chord Progression)
- Storing Settings (Setup)
- Chapter 3 Recording a Performance
- Chapter 4 Other Functions
- How to Make Settings
- Changing How the Pedal Effects Are Applied
- Changing How the Pedals Work
- Changing the Effect Type
- Setting the Part to Which Effects Are Added
- Changing the Pitch of the Lower Tone in Octave Steps (Octave Shift)
- Tuning to Other Instruments’ Pitches (Master Tuning)
- Adjusting the Tuning (Temperament)
- Changing the Beat of Metronome
- Setting the Intro and Ending On or Off
- Fixing a Set Chord Progression
- Setting the Root Note of the Chord Progression
- Setting the Chord Display On or Off
- Changing the Equalizer Settings
- Connecting to Audio Equipment
- About the FP-2 Sound Generator
- Connecting to the USB Connector
- Connecting MIDI Devices
- Using the V-LINK function
- Making the Settings for the USB Driver
- Restoring the Settings to the Factory Condition (Factory Reset)
- Disabling Everything Except Piano Play (Panel Lock)
- Troubleshooting
- Error Messages/Other Messages
- Tone List
- Rhythm List
- Chord Progression Pattern List
- Chord Fingering List
- Internal Song List
- Settings Stored in the Setup
- Easy Operation List
- MIDI Implementation Chart
- Main Specifications
- Index
19
Chapter 1 Playing the Keyboard
Changing the Keyboard’s Touch
You can change the touch sensitivity, or response of the keys.
When the instrument is turned on, this is set to “N (Normal).”
fig.01-17
1.
Hold down the [Effects] button and press the [Transpose]
button.
The indicators for the [Transpose] and [Reverb] buttons flash in red.
The currently selected keyboard touch appears in the display.
fig.01-18
2.
Press the [-] or [+] buttons to select the touch.
3.
Press the [Effects] button or the [Transpose] button.
The indicators return to their previous state.
Indicate Description
OFF
(Fixed)
The sound plays at one set volume, regardless of the force
used to play the keys.
-L-
(Light)
A light keyboard touch is selected. You can achieve fortis-
simo (ff) play with a less forceful touch than usual, so the
keyboard feels lighter. This setting makes it easy to play,
even for children.
-N-(Normal)
This sets the standard keyboard touch. You can play with
the most natural touch. This is the closest to the touch of
an acoustic piano.
-H-
(Heavy)
Here, a heavy keyboard touch is selected. You have to fin-
ger the keyboard more forcefully than usual in order to
play fortissimo (ff), so the keyboard touch feels heavier.
Dynamic fingering adds even more feeling to what you
play.
21,3
NOTE
With certain sounds, the
touch may not change.
FP-2_e.book 19 ページ ２００４年１１月２６日 金曜日 午後４時２５分