Owner's Manual Digital Piano FP-2
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Contents
- Panel Descriptions
- Before You Play
- Chapter 1 Playing the Keyboard
- Listening to Demo Songs
- Listening to Internal Songs
- Performing with a Variety of Sounds
- Performing With Two Layered Tones (Dual Play)
- Performing With Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Changing the Volume Balance for Dual Play and Split Play
- Changing the Keyboard’s Touch
- Adding Reverberation to Sounds (The Reverb Effect)
- Adding a Variety Effects to the Sound
- Transposing the Key of the Keyboard (Key Transpose)
- Using the Metronome
- Boosting the Low-Frequency Range (Sound Control)
- Changing the Tonal Quality (Equalizer)
- Chapter 2 Playing Along with Rhythms
- What is Session Partner?
- Performing Along With Session Partner
- Selecting a Rhythm
- Changing a Rhythm’s Tempo
- Selecting a Rhythm’s Chord Progression
- Performing With the Chord Progression Specified in the Left Hand (Chord Progression off)
- Recording the Chord Progression (Chord Progression)
- Storing Settings (Setup)
- Chapter 3 Recording a Performance
- Chapter 4 Other Functions
- How to Make Settings
- Changing How the Pedal Effects Are Applied
- Changing How the Pedals Work
- Changing the Effect Type
- Setting the Part to Which Effects Are Added
- Changing the Pitch of the Lower Tone in Octave Steps (Octave Shift)
- Tuning to Other Instruments’ Pitches (Master Tuning)
- Adjusting the Tuning (Temperament)
- Changing the Beat of Metronome
- Setting the Intro and Ending On or Off
- Fixing a Set Chord Progression
- Setting the Root Note of the Chord Progression
- Setting the Chord Display On or Off
- Changing the Equalizer Settings
- Connecting to Audio Equipment
- About the FP-2 Sound Generator
- Connecting to the USB Connector
- Connecting MIDI Devices
- Using the V-LINK function
- Making the Settings for the USB Driver
- Restoring the Settings to the Factory Condition (Factory Reset)
- Disabling Everything Except Piano Play (Panel Lock)
- Troubleshooting
- Error Messages/Other Messages
- Tone List
- Rhythm List
- Chord Progression Pattern List
- Chord Fingering List
- Internal Song List
- Settings Stored in the Setup
- Easy Operation List
- MIDI Implementation Chart
- Main Specifications
- Index
49
Chapter 4 Other Functions
fig.disp—-
3.
Press the [-] or [+] button to select pedal setting.
Transferring the FP-2’s Settings to an
External MIDI Device (Bulk Dump)
You can transfer the contents of FP-2’s Setup settings to an
external MIDI device. This operation is called “bulk dump.”
1.
Use a MIDI cable (optional) to connect the FP-2’s
MIDI OUT connector to the MIDI IN connector
on an external sequencer, or use a USB cable to
connect the computer.
2.
Switch to Function mode (p. 38), and press the
[Sound Control] button.
3.
Hold down the [Sound Control] button, and press
the [-] or [+] button to select bulk dump.
“dnP” is displayed, and the [Play/Stop] button’s
indicator begin flashes.
fig.disp—-
4.
Put the external sequencer in record mode.
5.
Press [Play/Stop] to transmit the settings.
After the transmitting is finished, “dnP” is appeared in
display.
6.
Stop the external sequencer.
Using the V-LINK function
Connecting the FP-2 to a V-LINK compatible image device
allows you to control the images with the FP-2.
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
V-LINK
V-LINK ( ) is functionality promoted by Roland
that allows linked performance of music and visual material.
By using V-LINK-compatible video equipment, visual effects
can be easily liked to, and made part of the expressive
elements of a performance.
■
How to Use the V-LINK
1.
Hold down the [Reverb] button and press the
[Split] button.
The display changes as shown below, and the FP-2
switches to Image Control mode.
fig
* The display does not change when chords are displayed.
You can control images using the twelve keys at the left
end of the keyboard.
fig
* While V-LINK is switched on, no sound is produced when you
press any of the twelve keys at the left end of the keyboard.
2.
Hold down the [Reverb] button and press the
[Split] button once again to exit.
Indication Description
OFF
You can use a function assigned to the
sostenuto(FC1) pedal and the soft(FC2)
pedal.
FC1
The sostenuto(FC1) pedal is dedicated to
switching Setup. The function assigned to
the sostenuto(FC1) pedal cannot to be
used.
FC2
The soft(FC2) pedal is dedicated to
switching Setup. The function assigned to
the soft(FC2) pedal cannot to be used.
Press
While holding
down...
Flashes Flashes
A0~G#1
FP-2_e.book 49 ページ ２００４年１１月２６日 金曜日 午後４時２５分