Owner's Manual Digital Piano FP-2
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Contents
- Panel Descriptions
- Before You Play
- Chapter 1 Playing the Keyboard
- Listening to Demo Songs
- Listening to Internal Songs
- Performing with a Variety of Sounds
- Performing With Two Layered Tones (Dual Play)
- Performing With Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Changing the Volume Balance for Dual Play and Split Play
- Changing the Keyboard’s Touch
- Adding Reverberation to Sounds (The Reverb Effect)
- Adding a Variety Effects to the Sound
- Transposing the Key of the Keyboard (Key Transpose)
- Using the Metronome
- Boosting the Low-Frequency Range (Sound Control)
- Changing the Tonal Quality (Equalizer)
- Chapter 2 Playing Along with Rhythms
- What is Session Partner?
- Performing Along With Session Partner
- Selecting a Rhythm
- Changing a Rhythm’s Tempo
- Selecting a Rhythm’s Chord Progression
- Performing With the Chord Progression Specified in the Left Hand (Chord Progression off)
- Recording the Chord Progression (Chord Progression)
- Storing Settings (Setup)
- Chapter 3 Recording a Performance
- Chapter 4 Other Functions
- How to Make Settings
- Changing How the Pedal Effects Are Applied
- Changing How the Pedals Work
- Changing the Effect Type
- Setting the Part to Which Effects Are Added
- Changing the Pitch of the Lower Tone in Octave Steps (Octave Shift)
- Tuning to Other Instruments’ Pitches (Master Tuning)
- Adjusting the Tuning (Temperament)
- Changing the Beat of Metronome
- Setting the Intro and Ending On or Off
- Fixing a Set Chord Progression
- Setting the Root Note of the Chord Progression
- Setting the Chord Display On or Off
- Changing the Equalizer Settings
- Connecting to Audio Equipment
- About the FP-2 Sound Generator
- Connecting to the USB Connector
- Connecting MIDI Devices
- Using the V-LINK function
- Making the Settings for the USB Driver
- Restoring the Settings to the Factory Condition (Factory Reset)
- Disabling Everything Except Piano Play (Panel Lock)
- Troubleshooting
- Error Messages/Other Messages
- Tone List
- Rhythm List
- Chord Progression Pattern List
- Chord Fingering List
- Internal Song List
- Settings Stored in the Setup
- Easy Operation List
- MIDI Implementation Chart
- Main Specifications
- Index
50
Chapter 4 Other Functions
Making the Settings for the
USB Driver
If you intend to connect to a computer using the USB
connector, you need to make the following setting before you
make the connection.
1.
Hold down the [-] and [+] button, press the
[Power] switch to turn on the power.
fig.04-04
2.
Press the [-] or [+] buttons to select the driver.
3.
Turn on the power once again.
Restoring the Settings to the
Factory Condition
(Factory Reset)
The settings stored in the FP-2 can be returned to their
factory settings.
* Executing “Factory Reset” results in deletion of the Settings.
If you want to keep any data you have stored, use the “Bulk
Dump” operation to save the data to an external sequencer (p.
49).
1.
Turn the volume to the minimum, and press the
[Power] switch to turn off the power.
2.
Hold down the [Reverb] button, and press the
[Power] switch to turn on the power.
fig.04-04
Continue pressing the button until “Fct” appears in the
display.
fig.04-04
“Fct” appears in the display, and the button’s indicators
flash for several seconds. Then, the screen and buttons
go back to normal.
Disabling Everything Except
Piano Play (Panel Lock)
Once Panel Lock is engaged, the instrument will allow only
normal piano playing. All buttons (except for the [Reverb]
button, the [Sound Control] button, and the [Equalizer]
button) will not function. This prevents the settings from
being inadvertently modified even if children press the
buttons accidentally.
1.
Turn the volume to the minimum, and press the
[Power] switch to turn off the power.
2.
Hold down the [Piano] button and press the
[Power] switch to turn on the power.
fig.disp—-
Then, continue to hold down these two buttons by
following display will appear.
fig.04-04
3.
Adjust the volume.
When you play the keyboard, the grand piano sound
will be heard.
It cannot be changed to another tone.
4.
To defeat the Panel Lock function, turn the
volume down to the minimum, and turn on the
power once again.
Indication Description
vdr
(Vender)
Select this when using the supplied driver
with a USB connection.
GEn
(Generic)
Select this when using a generic USB driver
included with the OS with a USB connection.
While holding
down...
Turn on the Power
While holding
down...
Turn on the Power
While holding
down...
Turn on the Power
FP-2_e.book 50 ページ ２００４年１１月２６日 金曜日 午後４時２５分