User's Manual

4
Placing the FP-30X on a Stand
If you want to place the FP-30X on a stand, use the Roland KSC-70 (refer to the KSC-70 Owner’s Manual), KS-12, KS-20X or KS-10Z.
* Be careful not to pinch your ngers when setting up the stand.
Before You Play
Connecting Equipment (Phones Jacks) Attaching the Music Rest
1. Insert the music rest into the slit on the top of the
piano.
Phones 1/2 jacks
You can connect stereo headphones
here. Since the FP-30X has two
headphone jacks, two people can use
headphones at the same time.
* The headphone jack on the left
accommodates a stereo mini-
plug, and the jack on the right
accommodates a stereo 1/4” plug.
Use the jack that ts the plug of
your headphones.
Headphones
1
1
KS-12
Adjust the height of the stand to the lowest position.
Adjust the width of the stand so
that the rubber feet on the front of
the piano t into the corresponding
openings of the stand
Keyboard side
Top view
KS-20X
Align the center of the Piano with the center of the stand.
Adjust the stand so that its width is not less than 700 mm (27-9/16 inch).
Place the Piano so that its rubber feet
on the front of the piano are on the
inner side of the stand
Top view
KS-10Z
Adjust the horizontal width
For safety, do not use the stand
in its very highest adjustment
position.
NOTE
Keyboard side
Align the front
of the Piano
with the front of
the stand
Align the front of the
Piano with the front of
the stand