User's Manual
Table Of Contents
- Contents
- Placing This Unit on a Stand
- Main Specifications
- Panel Descriptions
- Operation Guide
- Connecting the Piano and a Mobile Device via Bluetooth
- Advanced Operation
- Playing Various Tones
- Selecting Your Preferred Performance Environment (My Stage)
- Practicing with the Metronome
- Dividing the Keyboard for Two People (Twin Piano)
- Recording Your Performance
- SMF Recording
- Recording Audio
- Convenient Functions for Song Playback
- Renaming a Song (Rename Song)
- Copying a Saved Song (Copy Song)
- Deleting a Saved Song (Delete Song)
- Personalizing Your Piano Sound (Piano Designer)
- Using the Microphone
- Connecting a Microphone
- Applying an Effect to the Mic (Mic Effects)
- Saving Performance Settings (Registrations)
- What Is a Registration?
- Recalling a Registration
- Saving Current Settings into a Registration
- Convenient Functions
- Initializing the Memory (Format Media)
- Returning to the Factory Settings (Factory Reset)
- Retaining Settings After Power-Off (Memory Backup)
- Using USB
- Various Settings (Function Mode)
- Adjusting the Keyboard Response (Key Touch)
- Matching the Pitch with Other Instruments (Master Tuning)
- Changing the Tuning Method (Temperament)
- Specifying a Song’s Tonic (Temperament Key)
- Editing the Equalizer Settings
- Transposing the Pitch of the Song Playback (Song Transpose)
- Adjusting the Song Volume (Song Volume)
- Adjusting the Volume of an Audio Playback Device (Input/Bluetooth Vol.)
- Adjusting the Volume from the Computer (USB Audio Input Volume)
- Setting the Song (SMF) Playback Mode (SMF Play Mode)
- Selecting the Format for Recording (Recording Mode)
- Changing How the Pedal Effects Are Applied (Damper Pedal Part)
- Changing the Function of the Center Pedal (Center Pedal)
- Changing How the Pedal Effects Are Applied (Center Pedal Part)
- Sending Tone-Change Information (Transmit MIDI Information)
- Preventing Doubled Notes When Connected to a Sequencer (Local Control)
- MIDI Transmit Channel Settings (MIDI Transmit Ch.)
- Adjusting the Brightness of the Display (Display Contrast)
- Adjusting the Brightness of the Buttons (Panel Brightness)
- Outputting Sound Both from Headphones and Internal Speakers (Speaker Auto Mute)
- Making the Power Automatically Turn Off After a Time (Auto Off)
- Troubleshooting
- Error Messages
- Saved Settings
- Tone List
- Internal Song List
- USING THE UNIT SAFELY
- IMPORTANT NOTES
11
Operation Guide
Playing Back or Recording
Here’s how to play back or record a song.
Play/stop
1.
Press the [s] button.
Return to the beginning of the song
1.
Press the [u] button.
Change the song tempo
1.
Use the Tempo [Slow] [Fast] buttons to change the tempo.
Record
1.
Select the tone that you want to play.
2. You can sound the metronome if you like.
You can specify the tempo and time signature of the metronome. The
metronome’s tempo and time signature settings are stored in the song, so that
the metronome plays correctly even when you play back the song.
3. Press the [t] button.
The [t] button lights, the [s] button blinks, and the unit enters record-
standby mode.
If you decide to cancel recording, press the [t] button once again.
4. Press the [s] button to start recording.
5. Press the [s] button to stop recording.
p.
19
p.
18
Adjusting the Volume of the Song
1.
Use the [Song Vol.] slider to adjust the volume of the song.
This adjusts the volume of the song (SMF/audio).
Adjusting the Volume of the Song
This adjusts the volume of the song (SMF/audio).
1. Press the [Function] button.
2. Use the [K] [J] buttons to select Song Vol.
3. Use the [–][+] buttons to adjust the volume.
FP-90X
FP-60X
* Some of the tones used in the tone demo are set to be
adjusted by the Part [Upper] [Lower] slider. If you want to use
the [Song Vol.] slider (on the FP-60X, the function mode setting
“Song Vol.”) to adjust all of the parts, change SMF Play Mode
(p. 27) to “External.”
Using a Mic (Mic)
You can connect a mic to the this unit and mix the sound of its performance with
the sound from the mic.
p.
22
Selecting a Song
Access the song screen, and select a song.
1. Press the [Song] button to access the song screen.
Category
Tempo Time signature Measure
Song name
2. Press the [K] [J] buttons to select a category.
3. Press [–] [+] buttons to select a song.
4. Press the [s] button to play the song.
MEMO
To select a song from a folder on a USB ash drive, proceed as follows.
To open a folder
Use the [–] [+] buttons to select the folder, and
press the [s] button.
To close a folder
Use the [–] button to select “ (up)” and then press
the [s] button.
Category list
Category Explanation
Preset Songs Songs built into the piano
USB Memory Songs saved on a USB ash drive
Internal Memory Songs saved in internal memory
NOTE
* When the SMF Play Mode (p. 27) is set to “Auto-Select” or “Internal,” there are some
parts whose volume is not aected by the [Song Vol.] slider (on the FP-60X, the
function mode setting “Song Vol.”). If the SMF Play Mode is set to “External,” the
volume of all parts will change.
FP-90X
FP-60X
Song formats that can be played by the unit
The unit can play back data in the following formats.
Song format Explanation
MIDI les SMF format 0/1
Audio les
WAV format, 44.1 kHz, 16-bit linear
MP3 format, 44.1 kHz, 64 kbps–320 kbps