User's Manual
Table Of Contents
- Contents
- Placing This Unit on a Stand
- Main Specifications
- Panel Descriptions
- Operation Guide
- Connecting the Piano and a Mobile Device via Bluetooth
- Advanced Operation
- Playing Various Tones
- Selecting Your Preferred Performance Environment (My Stage)
- Practicing with the Metronome
- Dividing the Keyboard for Two People (Twin Piano)
- Recording Your Performance
- SMF Recording
- Recording Audio
- Convenient Functions for Song Playback
- Renaming a Song (Rename Song)
- Copying a Saved Song (Copy Song)
- Deleting a Saved Song (Delete Song)
- Personalizing Your Piano Sound (Piano Designer)
- Using the Microphone
- Connecting a Microphone
- Applying an Effect to the Mic (Mic Effects)
- Saving Performance Settings (Registrations)
- What Is a Registration?
- Recalling a Registration
- Saving Current Settings into a Registration
- Convenient Functions
- Initializing the Memory (Format Media)
- Returning to the Factory Settings (Factory Reset)
- Retaining Settings After Power-Off (Memory Backup)
- Using USB
- Various Settings (Function Mode)
- Adjusting the Keyboard Response (Key Touch)
- Matching the Pitch with Other Instruments (Master Tuning)
- Changing the Tuning Method (Temperament)
- Specifying a Song’s Tonic (Temperament Key)
- Editing the Equalizer Settings
- Transposing the Pitch of the Song Playback (Song Transpose)
- Adjusting the Song Volume (Song Volume)
- Adjusting the Volume of an Audio Playback Device (Input/Bluetooth Vol.)
- Adjusting the Volume from the Computer (USB Audio Input Volume)
- Setting the Song (SMF) Playback Mode (SMF Play Mode)
- Selecting the Format for Recording (Recording Mode)
- Changing How the Pedal Effects Are Applied (Damper Pedal Part)
- Changing the Function of the Center Pedal (Center Pedal)
- Changing How the Pedal Effects Are Applied (Center Pedal Part)
- Sending Tone-Change Information (Transmit MIDI Information)
- Preventing Doubled Notes When Connected to a Sequencer (Local Control)
- MIDI Transmit Channel Settings (MIDI Transmit Ch.)
- Adjusting the Brightness of the Display (Display Contrast)
- Adjusting the Brightness of the Buttons (Panel Brightness)
- Outputting Sound Both from Headphones and Internal Speakers (Speaker Auto Mute)
- Making the Power Automatically Turn Off After a Time (Auto Off)
- Troubleshooting
- Error Messages
- Saved Settings
- Tone List
- Internal Song List
- USING THE UNIT SAFELY
- IMPORTANT NOTES
2
°
Placing This Unit on a Stand
For the FP-90X
Be careful not to pinch your ngers when setting up the stand.
Please use one of the following Roland stands to support your FP-90X: KSC-90, KS-G8B, KS-10Z, KS-12 or KS-20X.
Refer to the following when using a stand.
KS-20X
KS-12
KS-10Z
Adjust the width of the stand so
that the rubber feet of the Piano
straddle the stand
Top view
Adjust the horizontal width
KS-G8B
Align the seam in the
Piano’s panel (on the
bottom, near the front)
with the corners of the
stand’s rubber feet
Align the front of the
Piano with the front of
the stand
Place the Piano so that
its rubber feet are on the
inner side of the stand
Align the center of the Piano with the center of the stand.
KSC-90
Refer to the KSC-90 Owner’s Manual.
Adjust the width of the stand so
that the rubber feet on the front of
the piano t into the corresponding
openings of the stand
Top view
Adjust the horizontal width
Adjust the stand so that its width
is not less than 700 mm.
Top view
Align the center of the Piano with the center of the stand.
For safety, do not use the
stand in its very highest
adjustment position.
For safety, do not use the
stand in its very highest
adjustment position.
For safety, do not use the
stand in its very highest
adjustment position.
NOTE
NOTE
NOTE
NOTE
Align the front of the
Piano with the front of
the stand