Owners Manual

Dynamic microphone

You can connect a dynamic mic here. Set the [PHANTOM] switch

“OFF.” Connect it to the MIC jack via an XLR type, TRS type, or TS type

plug.

Condenser microphone

You can connect a phantom-powered condenser mic here. Set the

[PHANTOM] switch to “48V.” (Phantom power: DC48 V, 6 mA Max)

Connect it to the MIC jack via an XLR type plug.

Headsets

If a headset is connected, the headset’s mic is used (p. 6).

* Headsets equipped with a CTIA-type 3.5 mm mini-plug (4-pole) are supported.

Internal mic

If a mic (including a headset mic) is not connected, the internal mic

is used (p. 2).

Adjusting the mic sensitivity

Use the [MIC] knob to adjust the mic’s sensitivity.

While watching the level meter in the app, adjust the level so that

it does reach the maximum.