User Manual

1. To the GO:MIXER PRO, connect the

instrument, mic, or audio player etc.

that you want to record.

2. Connect the included USB cable rst

to the GO:MIXER PRO and then to your

smartphone (p. 6).

* If you are unable to record on your smartphone,

slowly repeat step 2 once again.

* To prevent malfunction and equipment failure,

always turn down the volume, and turn o all

the units before making any connections.

* Before turning the unit on/o, always be sure to

turn the volume down. Even with the volume

turned down, you might hear some sound

when switching the unit on/o. However, this is

normal and does not indicate a malfunction.

* If operating on batteries, the POWER indicator

blinks when the batteries run low. If you

continue using the unit in this state, the power

automatically turns o after approximately one

minute. Replace the battery as soon as possible.

* In some cases, noise might be heard when you

connect a smartphone, or when you start up or

operate an app.

(*1) Connect only the included cable to this unit’s USB port.

Also, do not connect the included cable to any device

other than this unit (p. 6).