Operation Manual

29
Error Messages
°
Error Messages
Indication Meaning
Error 2
An error occurred during writing. The external media may be corrupted.
Insert other external media and try again. Alternatively, you can initialize the external media (p. 19).
The internal memory might be damaged. Format the internal memory (p. 19).
Error 10
No external media is inserted. Insert the external media and try again.
The internal memory might be damaged. Format the internal memory (p. 19).
Error 11
There is not sucient free memory in the save destination.
Either insert other external media or delete unneeded les and try again.
Error 14
An error occurred during reading. The external media may be corrupted.
Insert other external media and try again. Alternatively, you can initialize the external media (p. 19).
The internal memory might be damaged. Format the internal memory (p. 19).
Error 15 The le is unreadable. The data format is not compatible with this piano.
Error 18
This audio format is not supported.
Please use 44.1 kHz 16-bit linear WAV format audio les.
Error 30 Internal memory capacity of this piano is full.
Error 40
This piano cannot deal with the excessive MIDI data sent from the external MIDI device.
Reduce the amount of MIDI data sent to the piano.
Error 43 A MIDI transmission error has occurred. Check the connected MIDI device.
Error 51
There may be a problem with the system. Repeat the procedure from the beginning. If it is not solved after you have tried several times, contact the Roland
service center.
Error 65
The USB ash drive connector was subjected to excessive current. Make sure that there is no problem with the external media, then turn the power o, then
on again.