User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Main Features
- Contents
- Introduction
- Panel Descriptions
- Getting Ready
- Connecting the AC Adaptor
- Installing Batteries (Sold Separately)
- Connecting the External Equipment
- Turning On/Off the Power
- Adjusting the Volume Level ([VOLUME] Knob)
- Adjusting the Display Contrast ([LCD CONTRAST] Knob)
- Turning the Display Backlight On/Off
- Using the Included USB Memory Protector
- Listening to the Demo Songs
- Application Guide
- Reference
- Overview
- Detailed Tone Settings
- Detailed Settings for Performance Functions
- Song Player Settings
- Other Settings
- Connecting an External MIDI Device
- Appendices
24
Playing Ballads
This section explains how to select the piano tone for playing ballads. If use a pedal (sold separately), you can make
reverberate in the same way as if you were using the damper pedal on a piano. Use the “reverb” effect to add some
reverberation to your tone, as if you are playing in a concert hall.
Playing Ballads
Press the [PIANO] Button.
The piano tone is selected.
˚
Play the sample score.
Pedal—HOLD PEDAL
Try plugging a separately available pedal (DP series) into the HOLD PEDAL
jack on the back of JUNO-Di.
When you step on the pedal, the tone that you played is sustained as long
as the pedal is pressed (the same effect as the damper pedal on a piano).
Try using the pedal when you play.
The pedal can be assigned to other functions besides the
damper pedal. Refer to “Making Settings that are Common to
the Entire JUNO-Di (SYSTEM)” in the section “HOLD PEDAL”
(p. 75).
Selecting a Tone
Playing
[PIANO] Button
[REVERB] Knob
[PREVIEW] Button
Tone Buttons
1
Important
Function
Memo
JUNO-Di_e.book 24 ページ 2009年2月17日 火曜日 午後1時46分