KD-9 Kick Trigger Unit *5100017619-02*
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (p. 2; p. 3). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference.
IMPORTANT NOTES Placement • Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Excessive heat can deform or discolor the unit. • When moved from one location to another where the temperature and/or humidity is very different, water droplets (condensation) may form inside the unit. Damage or malfunction may result if you attempt to use the unit in this condition.
Getting Started Contents of the Package • KD-9 • Connection cable • Owner’s manual (this manual) * This package does not include a kick pedal or beater. A variety of commercially available beaters can be used, including felt, plastic, or wood types. KD-9 Components Head Output jack Anchor bolts Slip-prevention tape Mounting plate for the kick pedal Base Specifications KD-9: Kick Pad Dimensions 219 (W) x 203 (D) x 438 (H) mm 8-5/8 (W) x 8 (D) x 17-1/4 (H) inches Weight 2.
Setting Up the KD-9 Attaching the Kick Pedal 1. Attach the kick pedal. Position the beater so that it strikes the center of the head, then secure the kick pedal and KD-9 firmly in place. When Using a Twin Pedal Position the two beaters equally apart from the center of the pad as shown in the figure. If one of the beater is further away from the center than the other, the sound from the further beater will be lower in volume, or will not sound as desired.
Setting Up the KD-9 Connecting to a Percussion Sound Module * To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. Use the connection cable to connect the KD-9 to your percussion sound module (e.g., TD-20X). Connect the L-shaped plug of the cable to the KD-9’s output jack. * Make sure KD-9 does not touch the drum stand or other pads.
For EU Countries 有关产品中所含有害物质的说明 本资料就本公司产品中所含的特定有害物质及其安全性予以说明。 本资料适用于����年�月� 日以后本公司所制造的产品。 环保使用期限 此标志适用于在中国国内销售的电子信息产品，表示环保使用期限的年数。所谓环保使用 期限是指在自制造日起的规定期限内，产品中所含的有害物质不致引起环境污染，不会对 人身、财产造成严重的不良影响。 环保使用期限仅在遵照产品使用说明书，正确使用产品的条件下才有效。 不当的使用，将会导致有害物质泄漏的危险。 产品中有害物质的名称及含量 部件名称 铅（Pb） 汞（Hg） 有害物质 六价铬 多溴联苯 多溴二苯醚 镉（Cd） （Cr（VI）） （PBB） （PBDE） 外壳（壳体） 电子部件（印刷电路板等） 附件（电源线、交流适配器等） 本表格依据SJ/T �����的规定编制。 : 表示该有害物质在该部件所有均质材料中的含量均在GB/T ����� 规定的限量要求以下。 : 表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T �����的限量要求。 （企业可在此处，根据实际情况对上表中打“×”的技术原因
For EU Countries Manufacturer: Roland Corporation 2036-1 Nakagawa, Hosoe-cho, Kita-ku, Hamamatsu, Shizuoka 431-1304, JAPAN Importer: Roland Corporation ENA 23 Zone 1 nr. 1620 Klaus-Michael Kuehnelaan 13, 2440 Geel, BELGIUM For the U.K. Manufacturer: Roland Corporation 2036-1 Nakagawa, Hosoe-cho, Kita-ku, Hamamatsu, Shizuoka 431-1304, JAPAN Importer: Roland Europe Group Limited Hive 2, 1530 Arlington Business Park, Theale, Reading, Berkshire.
