Owner`s manual

11
About Operating Screens
9 LINK Button
This turns on/o the link of GEQ A/B (only while the GEQ is assigned to FX 1 – 6). You can also turn the stereo link on/o of GEQ even/odd
numbers.
10 BYPASS Button
Tap this to bypass the GEQ. While bypassing, this lights up.
11 Display Area
This part displays the settings of each frequency bands. The bands accessible in the GEQ fader area are surrounded by a border. You can
drag the border left/right to change the bands to adjust.
About the GEQ Selector
Tap the GEQ button on the side panel to display the currently selected GEQ number. Tap the number to call up the GEQ selector. You can
directly select the GEQ.
* Tap area outside of the GEQ selector to make it disappear.
g.GEQ-list.eps
The number of the currently selected GEQ lights up. You can select FX 1 – 6 only when a GEQ is assigned to the INT FX.