Owner`s manual

About Operating Screens

Scene List Popup

Tap the SCENE button on the side panel to call up the Scene List Popup. The current scene name is displayed with a check mark.

g.scene-list.eps

Save the Scene

Tap to select the target scene number and then tap the STORE button. The scene name editing screen opens.

ig.scene-name-edit.eps

Edit the scene name and tap [Done] on the software keyboard to save the scene.

You can use single-byte alphanumeric characters only.

Recall the Scene

Tap the scene name and then tap RECALL button.

Clear the Scene

Tap the scene name and then tap CLEAR button.

Operations on the M-480 Unit

Scene operations lock/unlock, lter on/o, or fade on/o are controlled via the M-480 directly. If these functions are on, they will be

reected as displayed below.

g.scene-setup.eps

FilterLock Fade