Owner`s manual

5
Booting/Quitting and Connection
3. Select the M-480 unit to connect
If this software nds any available M-480 unit(s), the display changes like below. If you have multiple M-480 units, change the wireless ID on
each M-480 unit. If you change IDs, the device name display on this software will also be changed. Tap the device name to select the target
unit for connection. For details of changing the wireless ID, refer to “Functionality Added in Ver. 1.6”.
g.select-M480.eps
4. Connect with the M-480
Tap or slide the button below of the ONLINE screen to start connection.
g.online-slider.eps
If an M-480 unit cannot be found
If this software cannot nd any available M-480 unit, the message “M-480 not found” is displayed. In such case or in case you cannot nd the
device name of the target M-480 unit, tap [Refresh] button to rescan.
g.device-not-found.eps
Disconnection
Tap or slide the button below of the ONLINE screen to disconnect.
g.disconnection.eps
The operations below may terminate the connection.
• Suspending the application
• Switching to another application
• Connecting to the notication center
If you want to prohibit such operations caused by multi-task gesture or auto lock, select corresponding items in [Setting] of your iPad and turn them o.