User Manual

10
Loading and Playing a Project
On the MC-707, data for one song is handled as a unit called a “project.”
Projects are saved on the SD card.
1
4
1. Press the [PROJECT] button.
2. Select “LOAD.”
3. Load the project.
4. Press the [START/STOP] button.
The project plays.
Switching Clips (CLIP Mode)
1
2
1. Press the PAD MODE [CLIP] button.
The pads are now in CLIP mode.
You can choose the clips that are played by the pads.
2. Press a pad and select a clip.
The clip is switched.
Selecting a Tone or Drum Kit
1
3
1. Press the PAD MODE [CLIP] button.
The pads are now in CLIP mode.
2. Press a pad to select the clip whose tone or drum kit you
want to change.
Now you can edit the selected clip.
3. Press the [SOUND] button.
The sound browser screen appears.
MEMO
You can also specify a tone or drum kit for the track and use it.
4. Select a tone or drum kit as directed by the screen.
Loading a Clip from SD Card
1
2
4
1. Stop playback.
Make sure that the [START/STOP] button is blinking.
If the [START/STOP] button is lit, press the [START/STOP] button to
stop playback.
2. Press the PAD MODE [CLIP] button.
The pads are now in CLIP mode.
3. Press a pad to select an empty clip as the loading-
destination.
4. Press the [CLIP] button.
The clip browser screen appears.
5. Select a clip.
The clip is loaded.
Performing and Producing