Setup guide

10
Chapter 2 Getting Ready
Chapter 2 Getting Ready
2-1 Preparing VersaWorks
Starting VersaWorks
On the computer you are using, start VersaWorks. For information on how to start the program, see the Roland
VersaWorks Quick Start Guide. After starting the program, go to the upper left of the main screen and check to
make sure that "Model (or Nickname) of Your Printer" is displayed, and that "Status" is set to "Ready to Print."
Creating a Folder for Saving PS Files
Before you actually print an image you draw using application software such as Adobe Illustrator, it is necessary
to save the image as a PS le(s). And then, you can print the image by loading the PS le(s) on VersaWorks.
Because of this, you should create a folder for saving PS les in advance. It is recommended to locate the folder
in the root directory on your computer's local disk.
Procedure

Open [Computer] ( or [My Computer]), and then open [Local Disk (C:)].

On the [Organize] menu, click [New Folder].
(Or on the [File] menu, click [New], and then
click [Folder].)

Enter the name for the folder, and then
press the Enter key.
Here you name the folder "MT-WH_print", for ex-
ample.