Setup guide

2-3 Creating Printing Data
Chapter 2 Getting Ready Chapter 2 Getting Ready
Chapter 2 Getting Ready
14
2. Create the illustration, and specify the spot color that matches the color you want to print.

Create the illustration.
Be sure to draw the illustration in the CMYK mode.

Specify each spot color that matches the color you want to print.
Desired ink or color Spot color name
Metallic silver ink RDG_MetallicSilver
White ink RDG_WHITE
Metallic color RVW-MT-Silver, RVW-MT-Bronze,
RVW-MT-TitanBlack, etc.
Using the metallic silver ink, you can perform the blend print and the layered print by combining the
ink with the CMYKLcLm ink.
 P. 18, “Blend Print and Layered Print (Metallic Silver and CMYKLcLm)”
Areas where you want to use metallic color
From the metallic color special colors library (Roland
Metallic Color System Library), specify the color such as
"RVW-MT-Bronze"
Specify "RDG_WHITE" for
the areas where you want to
use white ink.
Specify " RDG_MetallicSilver " for the
areas where you want to use metallic
silver ink.