Setup guide

Chapter 3 Printing

3-1 Print Job Setting

Chapter 3 Printing

Layered Print (Metallic Silver  CMYKLcLm)

This section describes how to perform the layered print with the metallic silver ink and CMYKLcLm ink using

the metallic silver ink as background.

 P. 18, “Blend Print and Layered Print (Metallic Silver and CMYKLcLm)”

To perform the layered print, you need to use the printing data where the use of the metallic silver ink and

the CMYKLcLm ink is designated.

 P. 12, “2-3 Creating Printing Data”

Procedure



Make sure that you have nished making the preparations for VersaWorks, getting the

printer ready, and creating the printing data ( page 9, "Chapter 2 -- Getting Ready").



Double-click .

Queue A Properties" window appears.



Click .

For [Media Type], select names with [MT]

attached such as "Generic Vinyl 1 [MT]".

Make the selection that matches the media to be

used. Selecting an item attached with [MT] enables

you to choose the print mode that can use the me-

tallic silver ink.

For [Print Quality], select [High Quality

(Layered)].

If [Mode] is selectable, select [Mt -> CMYKL-

cLm (v)].