Setup guide

28
Chapter 3 Printing
3-1 Print Job Setting
Chapter 3 Printing
Layered Print (CMYKLcLm  Metallic Silver)
This section describes how to perform the layered print with the metallic silver ink and CMYKLcLm ink using
the CMYKLcLm ink as background.
 P. 18, “Blend Print and Layered Print (Metallic Silver and CMYKLcLm)”
To perform the layered print, you need to use the printing data where the use of the metallic silver ink and
the CMYKLcLm ink is designated.
 P. 12, “2-3 Creating Printing Data”
Procedure

Make sure that you have nished making the preparations for VersaWorks, getting the
printer ready, and creating the printing data ( page 9, "Chapter 2 -- Getting Ready").

Double-click .
Queue A Properties" window appears.

Click .
For [Media Type], select “xxx[MT]: Clear
PET Film” or “xxx[MT]: PET Clear Film,
Adhesive” (or xxx: Clear PET Film,” “xxx:
PET Clear Film, Adhesive).
* “xxx” indicates “ESP-CL” and others.
For [Print Quality], select [High Quality
(Layered)].
For [Mode], select [CMYKLcLm -> Mt (v)].