Setup guide

Chapter 3 Printing
29
Chapter 3 Printing
3-1 Print Job Setting

Click .
Turn on the [Convert Spot Color] option.

Click .
In [Operation Mode], select the operation
of the printer.

Click [OK] to close the "Queue A Proper-
ties" window.
This is the end of the print job setting. To start printing, go on to page 41 “Starting the Print Operation.”
Only the settings necessary for the use of the metallic silver ink are described in this section. For other settings,
refer to the online help provided for VersaWorks.
When You Want to Display the Side Opposite the Printed Surface by Using Clear Film.
Click
.
Turn on the [Mirror] option.
When the printing data with mirror image is
prepared beforehand, you do not need to
turn on this option.