Setup guide

32
Chapter 3 Printing
3-1 Print Job Setting
Chapter 3 Printing
Printing Only with White Ink (W Mode)
This section describes how to perform printing only with the white ink when the printer is in W mode (7
colors of CMYKLcLmW). To use the white ink in printing, you need to use the printing data where the use of
the white ink is designated. If the printing data have the portion designating the use of other colors, with the
setting described in this section, you can print with the white ink only the area of the image which has been
designated to print with the white ink.
 P. 12, “2-3 Creating Printing Data”
Procedure

Make sure that you have nished making the preparations for VersaWorks, getting the
printer ready, and creating the printing data ( page 9, "Chapter 2 -- Getting Ready").

Double-click .
Queue A Properties" window appears.

Click .
For [Media Type], select “xxx: Clear PET
Film” or “xxx: PET Clear Film, Adhesive.”
“xxx” indicates “ESP-CL” and others. .
If [Mode] is selectable, select [White (v)].