Setup guide

34
Chapter 3 Printing
3-1 Print Job Setting
Chapter 3 Printing
Printing with While, Metallic Silver, and CMYK Ink
This section describes how to perform printing with the metallic silver ink, the white ink, and the CMYK ink.
Deciding which ink between the white and the others (the metallic silver and CMYK) you want to use for the
base is an important point in determining the print job setting here.
To use the metallic silver ink and the white ink, you need to use the printing data where the use of the respec-
tive inks is designated. For the area of the image to be printed with the metallic silver ink and the CMYK ink
combined, the setting is xed to the blend print.
 P. 12, “2-3 Creating Printing Data”
Procedure

Make sure that you have nished making the preparations for VersaWorks, getting the
printer ready, and creating the printing data ( page 9, "Chapter 2 -- Getting Ready").

Double-click .
Queue A Properties" window appears.

Click .
For [Media Type], select “xxx[MT]: Clear
PET Film” or “xxx[MT]: PET Clear Film,
Adhesive.”
* “xxx” indicates “ESP-CL” and others.
For [Print Quality], select [High Quality].
With [Mode], select the print mode.
White -> CMYKMt (v)
Inks are overprinted in the sequence of white and
then metallic silver/CMYK Color.
CMYKMt -> White (v)
Inks are overprinted in the sequence of white and
then metallic silver/CMYK Color.