Setup guide

Chapter 3 Printing

3-1 Print Job Setting

Printing with White Ink and CMYKLcLm Ink (WMT Mode)

This section describes how to perform printing with the white ink and CMYKLcLm ink when the printer is in

WMT mode (8 colors of CMYKLcLmWMT). Deciding which ink between the white and the CMYKLcLm you

want to use for the base is an important point in determining the print job setting here. To use the white ink

for printing, you need to use the printing data where the use of the white ink is designated.

 P. 12, “2-3 Creating Printing Data”

Procedure



Make sure that you have nished making the preparations for VersaWorks, getting the

printer ready, and creating the printing data ( page 9, "Chapter 2 -- Getting Ready").



Double-click .

Queue A Properties" window appears.



Click .

For [Media Type], select “xxx: Clear PET

Film” or “xxx: PET Clear Film, Adhesive.”

“xxx” indicates “ESP-CL” and others.

With [Mode], select the print mode.

White -> CMYKLcLm (v)

Inks are overprinted in the sequence of white and

then CMYKLcLm Color.

CMYKLcLm -> White (v)

Inks are overprinted in the sequence of CMYKLcLm

and then white Color.

* The image of overprinting in the sequence of white and CMYKLcLm is the same as that of overprinting in

the sequence of white and metallic silver/CMYK on page 35. (The description of “metallic silver/CMYK” is

to be replaced with “CMYKLcLm” only.)