Setup guide

40
Chapter 3 Printing
3-1 Print Job Setting
Chapter 3 Printing

Click .
Turn on the [Convert Spot Color] option.

Click .
In [Operation Mode], select the operation
of the printer.

Click [OK] to close the “Queue A Proper-
ties” window.
This is the end of the print job setting. To start printing, go on to page 41 “Starting the Print Operation.”
Only the settings necessary for the use of the white ink are described in this section. For other settings, refer
to the online help provided for VersaWorks.
When You Want to Display the Side Opposite the Printed Surface by Using Clear Film.  P. 36