User Manual

ManualsBrandsRoland ManualsDJ productsVerselab MV-1 - MUSICAL PRODUCTION STUDIO

Common Section (1)

[VOLUME] knob

Adjusts the volume of signal from the LINE OUT jacks.

[PHONES] knob

Adjusts the volume of signal from the PHONES jack.

[SHIFT] button

Use this button with other buttons to switch between functions.

Functions that are accessed when holding the [SHIFT] button are

shown below each button.

[EDIT] button

Use this with other buttons to call up screens for various settings.

[CLEAR] button

Use this to erase content recorded with the step sequencer as well as

sections, clips and so on.

[COPY] button

Use this to copy and exchange sections and clips.

[NOTE] button

Switches the pads to Note mode. This mode lets you play the pads as

if playing a keyboard, or use the drum kits (tones) to play drum parts

and so on.

If you hold down the [SHIFT] button and press the [NOTE] button, the

pads switch to Velocity mode. This lets you play the pads using 16

levels of velocity (how loud or soft the sound is), regardless of how

hard or soft you play the pads.

[STYLE] button

Switches the pads to Style mode. This lets you play phrases with

triplets, repeated notes and so on, as well as arpeggios.

If you hold down the [SHIFT] button and press the [STYLE] button, the

pads switch to Chord mode. In this mode, you can play chords just by

pressing the pads.

[SECTION SELECT] button

Switches the pads to Section Select mode. In this mode, you can select

sections by pressing the pads.

If you hold down the [SHIFT] button and press the [SECTION SELECT]

button, the quantize setting screen appears.

[REC] button

Use this button for recording phrases, changing SONG structures,

recording vocals and so on.

While holding down the [SHIFT] button, press the [REC] button to

enter sampling standby mode.

MEASURE [<] [>] buttons

Use these buttons to move to the measure you want to edit.

If you hold down the [SHIFT] button and press the MEASURE [<] [>]

buttons, the tonal range of the pads changes in octaves.

Measure indicators (4)

Shows the measure position while editing or during playback.

Panel Descriptions

Top Panel