Owner`s manual

Use As a Matrix Switcher

You can use the buttons on the front panel to assign source channels to output destinations [1] through [4].

1. Select the output destination.

Use [MATRIX OUT] buttons [1] through [4] to select the channel for the output destination.

* Buttons [1] through [4] correspond to MATRIX OUT connectors 1 through 4.

fig.select-out-channel.eps

2. Select the source.

Use the [INPUT SELECT] buttons to choose the channel of the source you want to assign to the output destination you selected in

step 1.

fig.select-source.eps

3. Verify the assignment.

When you have finished assigning sources, press the same [MATRIX OUT] button. The [INPUT SELECT] button for the assigned

channel lights up.

* When an assignment has been made, the Matrix Out destination(s) appears in the upper right section of the source window. You can assign

the same source to all destinations from [1] to [4].

fig.assign-number.eps

Using Buttons to Select the Output Destination and Source

When assigned to 1 When assigned to 3 When assigned to 1 through 4