Specifications

22
SPECIFICATIONS
S-240P
Power Output
+24V/6A DC
Power Supply
AC 115 V, 117 V, 220 V, 230 V, 240 V (50/60 Hz)
Weight
5.4 kg, 11 lbs 15 oz.
Power Consumption
180 W
Dimensions
482 (W) x 340 (D) x 89 (H) mm
19 (W) x 13-7/16 (D) x 3-9/16 (H) inches
SPECIFICATIONS
SI-AD4
Number of Channels
4 inputs
PAD
20 dB On/Off
Phantom Power
+48 V/14 mA
Input Impedance
20 k-ohms
Indicator
Phantom, Clip, Signal
Connectors
XLR type x 4, balanced
AD Conversion
24-bit/44.1 kHz, 48 kHz, 96 kHz
Nominal Input Level
-65 to -10 dBu (PAD: Off), -45 to +10 dBu (PAD: On)
(1 dB step, Max. +28 dBu)
SPECIFICATIONS
SO-DA4
Number of Channels
4 outputs
Recommended
Load Impedance
10 k-ohms or greater
Output Impedance
150-ohms
Connectors
XLR type x 4, balanced
DA Conversion
24-bit/44.1 kHz, 48 kHz, 96 kHz
Nominal Output
Level
+4 dBu (Max. +22 dBu)
SPECIFICATIONS
SI-AES4
Number of Channels
4 inputs (All with sampling rate conversion)
Indicator
LOCK, Sampling Rate (96 kHz, 48 kHz, 44.1 kHz, OTHER)
* When 88.2 kHz is inputted, OTHER and 44.1 kHz will indicate
Connector
XLR3-31 type x 2
Bit Rate
24-bit
Format
AES/EBU (Professional Use), IEC60958-4 (Professional Use)
* Not support for double wire
SPECIFICATIONS
SO-AES4
Number of Channels
4 inputs (All with sampling rate conversion)
Indicator
Clock Source (IN, EXT, SRC), LOCK (Word clock),
Sampling Rate (96 kHz, 48 kHz, 44.1 kHz)
Connector
XLR3-32 type x 2
WORD CLOCK IN/OUT (BNC)
Bit Rate
24-bit
Format
AES/EBU (Professional Use), IEC60958-4 (Professional Use)
* Not support for double wire
S-4000RCS Remote Control Software
Remote control software for the S-4000S/S-1608/S-0816/S-0808 providing the same functionality as the S-4000R. It also enables control of the M-48
Personal Mixer and the S-4000M REAC Merge Unit. Free download available from the Roland Systems Group website. www.rolandsystemsgroup.net
Option
SC-A41S multi-cables are convenient for connection to the S-4000H, analog consoles, and other equipment. The SC-A0805DF has eight female
XLR connectors and a 25-pin D-Sub connector. The SC-A0805DM has eight male XLR connectors and a 25-pin D-Sub connector. Each cable is 4.5
meters long.
Preamp Gain, Phantom Power, PAD are
controllable from the S-4000RCS software.
Also preamp gain setups can be saved and
recalled.
Preamp Control
Enable setup and manage the M-48 parameters on
PC.
Personal Mixing Management & Control
Configures routing, input preamp gain,
PAD and phantom power.
S-4000M Merge Unit Control
SC-A41S
D-SUB/XLR Cable Set
Digital Snake S-4000 series