Tripod Product Manual

6
Chapter
1
Situation practical use technique
Chapter
2
Chapter
3
Applied technique
Chapter
4
Appendix
Situation
The outstanding features of the R-09HR
Setting
the recording level
First, set the recording volume. Play a phrase
that has the highest volume, and then adjust the
recording level so that the R-09HR level meter
reaches the highest level without the PEAK
indicator, shown in red below, turning on.
When the PEAK
indicator turns on,
the input volume is
too high.
If the level is set too low,  delity is lost. If the
sound level is set too high, pops and snaps may
be produced.
See p. 45 in the Owner’s Manual for setting the
recording level.
☞
Positioning
the R-09HR
The left and right microphones on the R-09HR
record sound that the left and right ear, respec-
tively, would hear. So, aim the R-09HR to directly
at what you want to record.
Also, moving closer to the sound source creates
a more distinct recording, while moving further
away softens the sound by recording the ambi-
ent sound of the room.
Aim directly
at the sound
source.
See “Techniques for recording speci c instru-
ments” on p. 18 in this guide for recording
di erent instruments.
☞
Recording acoustic instruments
Point
1
Point
2
1
R-09HR_guide_e1.indd 6 07.12.27 11:30:33 AM