Specifications
Table Of Contents
- Contents
- Chapter 1 Introduction
- Chapter 2 Operation
- Chapter 3 Maintenance and Adjustment
- Chapter 4 Feature Reference
- 4-1 Pausing or Canceling Output
- 4-2 Setting the Location for Starting Output
- 4-3 Saving the Printer Settings to Match the Media
- 4-4 Optimizing Printing or Cutting to Match Media Thickness
- Adjusting Head Height to Match Media Thickness (54-inch Model Only)
- Correcting for Misalignment in Bidirectional Printing
- Correcting for Misalignment in Bidirectional Printing More Precisely
- Performing Feed Correction to Alleviate Horizontal Bands and the Like
- Performing Distance Correction During Cutting
- 4-5 Accommodating Various Kinds of Media
- 4-6 Changing How the Printer Operates
- 4-7 Changing the Ink-drying Method
- 4-8 Making Various Adjustments for Cutting
- 4-9 Performing Printing and Cutting Separately
- 4-10 Making the Network Settings
- 4-11 Viewing Information about the Media and the System
- 4-12 Performing Maintenance
- 4-13 Menu List
- Chapter 5 What to Do If
- Chapter 6 Specifications
3-4 Replacing Consumable Parts
61
3
Maintenance and
Adjustment
Press .
Press
several times.
Press .
The cutting carriage moves to a location where blade replacement is possible, and
then the screen shown in the gure appears.
Open the front cover.
Preparations are complete when this screen appears.
2.
Replace the blade.
Remove the blade holder.
MAINTENANCE
REPLACE KNIFE
FINISHED?
Press this pin.
Blade holder
Old blade
New blade
Pin
Blade holder
Remove the old blade. Install a new blade.