Specifications
Table Of Contents
- Contents
- Chapter 1 Introduction
- Chapter 2 Operation
- Chapter 3 Maintenance and Adjustment
- Chapter 4 Feature Reference
- 4-1 Pausing or Canceling Output
- 4-2 Setting the Location for Starting Output
- 4-3 Saving the Printer Settings to Match the Media
- 4-4 Optimizing Printing or Cutting to Match Media Thickness
- Adjusting Head Height to Match Media Thickness (54-inch Model Only)
- Correcting for Misalignment in Bidirectional Printing
- Correcting for Misalignment in Bidirectional Printing More Precisely
- Performing Feed Correction to Alleviate Horizontal Bands and the Like
- Performing Distance Correction During Cutting
- 4-5 Accommodating Various Kinds of Media
- 4-6 Changing How the Printer Operates
- 4-7 Changing the Ink-drying Method
- 4-8 Making Various Adjustments for Cutting
- 4-9 Performing Printing and Cutting Separately
- 4-10 Making the Network Settings
- 4-11 Viewing Information about the Media and the System
- 4-12 Performing Maintenance
- 4-13 Menu List
- Chapter 5 What to Do If
- Chapter 6 Specifications
4-4 Optimizing Printing or Cutting to Match Media Thickness
77
4
Feature
Reference
Press to go back to the original screen.
Description
The movement distance of the media changes subtly depending on the media's thickness. This means that the length of a
line when cut may dier from the length setting in the data. You enter a correction value when you want to align the lengths
of cut lines precisely.
However, when you’re performing printing followed by cutting, be sure to set the correction value to “0.00%.” Otherwise the
printing and cutting positions may become misaligned.
Default Setting
[FEED SETTING]: 0.00%
[SCAN SETTING]: 0.00%
W1200mm
SETUP SHEET