Specifications
Table Of Contents
- Contents
- Chapter 1 Introduction
- Chapter 2 Operation
- Chapter 3 Maintenance and Adjustment
- Chapter 4 Feature Reference
- 4-1 Pausing or Canceling Output
- 4-2 Setting the Location for Starting Output
- 4-3 Saving the Printer Settings to Match the Media
- 4-4 Optimizing Printing or Cutting to Match Media Thickness
- Adjusting Head Height to Match Media Thickness (54-inch Model Only)
- Correcting for Misalignment in Bidirectional Printing
- Correcting for Misalignment in Bidirectional Printing More Precisely
- Performing Feed Correction to Alleviate Horizontal Bands and the Like
- Performing Distance Correction During Cutting
- 4-5 Accommodating Various Kinds of Media
- 4-6 Changing How the Printer Operates
- 4-7 Changing the Ink-drying Method
- 4-8 Making Various Adjustments for Cutting
- 4-9 Performing Printing and Cutting Separately
- 4-10 Making the Network Settings
- 4-11 Viewing Information about the Media and the System
- 4-12 Performing Maintenance
- 4-13 Menu List
- Chapter 5 What to Do If
- Chapter 6 Specifications
84
4
Feature
Reference
4-6 Changing How the Printer Operates
Executing Environment Matching Automatically
Procedure
Press .
Press
.
Press .
Press
.
Press .
Use
to select "ENABLE."
Press
to enable the setting.
Press to go back to the original screen.
Description
This setting enables or disables the feature for automatic adjustment to optimize the state of the machine to the environment
where it is used (temperature and humidity). Performing automatic adjustment can reduce misalignment in the scanning
direction (the direction of carriage movement) during printing or cutting. It is normally set to "ENABLE."
Default Setting
[AUTO ENV. MATCH]: ENABLE
Determining What Happens When Ink Runs Out
Procedure
Press .
Press
several times.
Press .
Press
twice.
Press twice.
Use
to make the setting.
Press
to enable the setting.
Press to go back to the original screen.
Description
This lets you change, according to your purpose, the operation that takes place when an ink cartridge is empty.
"STOP" immediately pauses operation when a cartridge becomes empty. Because pausing printing in progress may make
colors uneven, it is best to ensure a sucient amount of remaining ink before you begin printing.
"CONT." (continue) is a mode in which operation is not automatically stopped. When a cartridge becomes empty, a warning
MENU
CUTTING MENU
CUTTING MENU
AUTO ENV. MATCH
AUTO ENV. MATCH
DISABLE
ENABLE
MENU
SUB MENU
SUB MENU
INK CONTROL
EMPTY MODE
STOP CONT.