Owner`s manual

107
Troubleshooting
“Found unknown device” appears even though you
installed the driver
If your computer or USB hub has two or more USB connectors, and you connect the PCR-M1 to a
USB connector to which the PCR-M1 has never been connected before, the “Unknown device”
dialog box may appear even on a computer onto which you have already installed the driver.
Refer to Installing the driver (p. 18), and install the driver once again. This is not a malfunction.
If the “Found unknown device” dialog box appears even though the PCR-M1 is connected to the
same USB connector as before, it is possible that the computer has detected the PCR-M1 incorrectly.
Please reinstall the driver from the beginning of the procedure (p. 18).
Can’t install/delete/use the driver in Windows XP/2000
• Did you log on to Windows as a user with administrative privileges?
In order to install/delete/re-install the driver in Windows XP/2000, you must be logged into
Windows as a user with administrative privileges, such as Administrator. For details, please
contact the system administrator for your computer system.
• Did you make “Driver Signing Options”?
• In order to install/re-install the driver, you must make “Driver Signing Options”.
( ➝ Windows XP (p. 18), Windows 2000 (p. 23)
Windows XP/2000 displays a “Hardware Installation” or
“Digital Signature Not Found” dialog box
• Did you make “Driver Signing Options”?
In order to install/re-install the driver, you must make the settings described in “Driver Signing
Options” .
( ➝ Windows XP (p. 18), Windows 2000 (p. 23)
PCR-M1_e.book 107 ページ ２００７年２月５日 月曜日 午前１１時１９分