Owner`s manual

21
Getting Connected and Installing Drivers (Windows)
16
The screen will indicate “Completing the Found New Hardware Wizard” .
Make sure that the “Model” field indicates “EDIROL PCR” , Click [Finish] .
Wait until “Found New Hardware” appears near the taskbar.
17
When driver installation has been completed, the System Settings Change
dialog box will appear.
Click [Yes] . Windows will restart automatically.
If the System Settings
Change dialog box does
not appear, restart
Windows from the Start
menu.
Depending on how your
system is set up, the
System icon may be
displayed directly in the
Control Panel (classic
view). In this case, double-
click the System icon.
If you changed “What action do you want Windows to
take?”
If you changed the What action do you want Windows to take? (p. 18)
setting, restore the original setting after Windows restarts.
1. Log on to Windows using the user name of an administrative account
(e.g., Administrator).
2. Click the Windows start menu, and from the menu that appears, select
Control Panel.
3. In “Pick a category,” click “Performance and Maintenance”.
4. In “or pick a Control Panel icon”, click the System icon. The System
Properties dialog box will appear.
5. Click the Hardware tab, and then click [Driver Signing]. The Driver
Signing Options dialog box will appear.
6. Return the What action do you want Windows to take? setting to the
original setting (either “Warn” or “Block”), and click [OK].
7. Click [OK]. The System properties dialog box will close.
This completes installation of the driver.
Next, we recommend that you enable background processing on your computer, so MIDI
processing will be as smooth as possible.(➔ Enabling background processing (p. 22))
PCR-M1_e.book 21 ページ ２００７年２月５日 月曜日 午前１１時１９分