Owner`s manual

27
Getting Connected and Installing Drivers (Windows)
Windows Me/98 users
1
With the PCR disconnected, start up Windows.
Disconnect all USB cables except for a USB keyboard and USB mouse (if
used).
If you are using virus checking or similar software, be sure to exit it as well.
2
Exit all currently running software (applications).
Also close any open windows. If you are using virus checking or similar
software, be sure to exit it as well.
3
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your computer.
4
Click the Windows Start menu. From the menu that appears, select Run... .
The “Run...” dialog box will appear.
f
5
In the dialog box that appears,
input the following into the
“Open” field, and click [OK] .
(drive name) : \Driver\USB_ME98\SETUPINF.EXE
The SetupInf dialog box will appear.
You are now ready to install the driver.
* In the explanatory example shown here, the drive name is given as “D:” . The drive name “D:”
may be different for your system. Specify the drive name of your CD-ROM drive.
6
Use the USB cable to connect the PCR to your computer.
1. Set the PCR’s power switch to the “OFF” position.
2. Use the USB cable to connect the PCR to your computer.
3. Set the PCR’s power switch to the “USB” position.
The driver will be installed automatically.
7
In the SetupInf dialog box, click [OK] .
To check the drive name
In the Windows desktop,
double-click the My
Computer icon. In the
window that appears,
check the drive name of
the CD-ROM drive into
which you inserted the
CD-ROM in step3.
The drive name is the (D:)
or (E:) displayed by the
CD-ROM drive .
Once the connections have
b
een completed, turn on
power to your various
devices in the order
specified. By turning on
devices in the wrong
order, you risk causing
malfunction and/or
damage to speakers and
other devices.
This unit is equipped with
a protection circuit. A brief
interval (a few seconds)
after power up is required
b
efore the unit will operate
normally.
If a message recommends
that you restart Windows,
restart Windows as
directed.
Next, make device settings.
(➝Specifying the MIDI input/output destination (p. 28))
PCR-M1_e.book 27 ページ ２００７年２月５日 月曜日 午前１１時１９分