Owner`s manual

29
Getting Connected and Installing Drivers (Windows)
Windows 2000 / Me users
* These settings are valid only when using the PCR as a MIDI interface. For details on
connections, refer to “ USB connections with your computer “(p. 43).
1
Open Control Panel .
Click the Windows Start menu, and from the menu that appears, select
Settings | Control Panel .
2
Open the Sounds and Multimedia Properties .
In Control Panel , double-click the Sounds and Multimedia icon to open the
“Sounds and Multimedia Properties” dialog box.
3
Click the AUDIO tab.
fig.MEe
4
For MIDI music playback , click the ▼
located at the right of [Preferred
device] , and select [EDIROL PCR MIDI
OUT] from the list that appears.
If you want to use Media Player to play
a sound module connected to the
PCR’s MIDI OUT connector, select
EDIROL PCR MIDI OUT .
5
Close the Sounds and Audio Devices Properties dialog box.
Click [OK] to complete the settings.
For details on the PCR’s
input/output devices,
refer to Input / output
devices (p. 45).
Select the appropriate
MIDI device for your
system. You do not
necessarily have to select
EDIROL PCR MIDI OUT.
This completes settings for using the PCR with an application that uses the standard Windows
device settings, such as Media Player.
For details on how to make these settings, refer to the owner’s manual for your software.
For details on the PCR’s input/output devices, refer to Input / output devices (p. 45).
PCR-M1_e.book 29 ページ ２００７年２月５日 月曜日 午前１１時１９分