Owner`s manual

30
Getting Connected and Installing Drivers (Windows)
Windows 98 users
* These settings are valid only when using the PCR as a MIDI interface. For details on
connections, refer to “ USB connections with your computer “(p. 43).
1
Open Control Panel .
Click the Windows Start menu, and from the menu that appears, select
Settings | Control Panel .
2
Open the Multimedia Properties dialog box.
In Control Panel , double-click the Multimedia icon to open the “Multimedia
Properties” dialog box.
3
Click the MIDI tab.
fig.98_E
4
Set “MIDI output” .
Select [Single instrument] , and
choose [EDIROL PCR MIDI OUT]
from the list that appears, and click
[Apply] .
If you want to use Media Player to
play a sound module connected to the
PCR’s MIDI OUT connector, select
EDIROL PCR MIDI OUT .
5
Close the Multimedia Properties dialog box.
Click [OK] to complete the settings.
For details on the PCR’s
input/output devices,
refer to Input / output
devices (p. 45)
Select the appropriate
MIDI device for your
system. You do not
necessarily have to select
EDIROL PCR MIDI OUT.
This completes settings for using the PCR with an application that uses the standard Windows
device settings, such as Media Player.
For details on how to make these settings, refer to the owner’s manual for your software.
For details on the PCR’s input/output devices, refer to Input / output devices (p. 45).
PCR-M1_e.book 30 ページ ２００７年２月５日 月曜日 午前１１時１９分