Owner`s manual

36
Getting Connected and Installing Drivers (Macintosh)
fig.3-8_35
6
Choose “Open” from the File
menu.
From the OMS Setting folder that
you copied in step 3 , select the PCR
file, and click [Open] .
A screen like the one shown here
will appear.
fig.3-9_35
7
From the Edit menu, select OMS
MIDI Setup .
In the OMS MIDI Setup dialog box
that appears, check Run MIDI in
background , and click [OK] .
fig.3-10_40
8
From the File menu, choose Make
Current .
* If you are unable to select Make
Current , it has already been applied,
and you may continue to the next step.
9
Verify that MIDI transmission and reception can be performed correctly.
From the Studio menu, choose Test Studio .
A diamond mark (◊) indicate in the settings are enabled.
PCR-M1_e.book 36 ページ ２００７年２月５日 月曜日 午前１１時１９分