Owner`s manual

37
Getting Connected and Installing Drivers (Macintosh)
fig.OMS3
10
Try moving the fader of the PCR. If
the arrow beside number 2 or 3 in
the diagram at right blinks, the
settings have been made correctly.
When you move the mouse cursor
near the MIDI connector icon, the
cursor will change to a  shape.
If a MIDI sound module is
connected to the PCR’s MIDI OUT
connector, click the MIDI connector
icon shown in the diagram at the right. If you hear sound, the settings have
been made correctly.
11
Exit OMS Setup .
From the File menu, choose [Exit] . If the AppleTalk confirmation dialog box
appears, click [OK] to close the dialog box.
For details on the PCR’s
input/output devices,
refer to Input / output
devices (p. 45).
This completes installation of the driver.
Next, make MIDI device settings in your sequencer or other software.
For details on how to make these settings, refer to the owner’s manual for your software.
For details on the PCR’s input / output devices, refer to Input / output devices (p. 45).
PCR-M1_e.book 37 ページ ２００７年２月５日 月曜日 午前１１時１９分