Owner`s manual

43
Basic connections and MIDI flow
USB connections with your computer
– Using the PCR-M1 as a MIDI interface –
* If you want to use Media Player to play a sound module connected to the PCR’s MIDI OUT connector,
make driver settings as described in “ Specifying the MIDI input/output destination ”(p. 28).
fig.connect-basic
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and
turn off the power on all devices before making any connections.
*
Use only the specified expression pedal (EV Series; sold separately). By connecting any other expression
pedals, you risk causing malfunction and/or damage to the unit.
■ MIDI flow
Turn MIDI I/F MODE ON as described in “MIDI I/F MODE” (
p. 94).
fig.flow-usb
* For an explanation of the items in the diagram, refer to Input / output devices (p. 45).
* For more about BULK data, refer to “ Bulk dump ” (p. 87).
BULK RECEPTION BULK data is received here
PORT 1
Of the keyboard, pitch bender, and other controllers, those that have been set to PORT 1 will transmit data
from here
PORT 2
Of the keyboard, pitch bender, and other controllers, those that have been set to PORT 2 will transmit data
from here
BULK TRANSMISSION BULK data is transmitted from here
DP series
(sold separately)
AC adaptor (sold separately)
It is not necessary to connect the AC
adaptor if you are using a USB
connection. However, with some
computers, the PCR-1M may not
operate when powered from the USB
bus. In this case, set the power switch to
the DC position and connect the AC
adaptor.
EV series
(sold separately)
USB cable
MIDI sound module (sold separately)
MIDI
OUT
MIDI
OUT
MIDI
IN
MIDI
IN
PCR-M1PC
USB
EDIROL PCR
EDIROL PCR MIDI OUT
EDIROL PCR 2
EDIROL PCR 1
EDIROL PCR MIDI IN
MIDI OUT
MIDI IN
MIDI I/F MODE ON
PORT 1
PORT 2 /
MIDI OUT DEVICE
MIDI IN DEVICE
BULK RECEPTION
BULK TRANSMISSION
PCR-M1_e.book 43 ページ ２００７年２月５日 月曜日 午前１１時１９分