Owner`s manual

Use MIDI functionality

Selecting Sounds on a Sound Module

(Sending Program Change / Bank Select Massages)

To select a sound on your MIDI sound module, transmit a Program Change in

Program

Change mode

To select a sound from a different bank, first use

Bank mode

to transmit a Bank Select message

that switches the bank. Then transmit a program change.

* You must send the Bank Select message before sending the Program Change message.

•

Program Change Mode (PROGRAM CHANGE)

(p. 53)

•

Bank mode (BANK)

(p. 54)

What is a bank?

MIDI sound modules organize their numerous sounds in various groups according to the

category of sound.

These groups are called “banks.”

Program Change messages can only select sounds within the same bank, but by using these in

conjunction with Bank Select messages, you can select different variations of sound.

* The way in which sounds are organized will differ for each sound module. For details, refer to the owner’s

manual of the sound module you are using.

PCR-M1_e.book 52 ページ２００７年２月５日　月曜日　午前１１時１９分