Owner`s manual

56
Use MIDI functionality
Changing the Memory Sets
When the PCR-M1 is shipped, its internal memory contains sixteen different settings. For
details on the contents of each memory number, refer to Memory sets (p. 98).
You will use Memory mode to change the Memory sets.
■ Memory mode (MEMORY)
fig.memory2_90
fig.memory
1
Press the [MEMORY] button.
The [MEMORY] button will light. The display will indicate the memory
number that you selected most recently.
2
Use the [VALUE] dial, the [DEC] [INC] buttons, or the [0] - [F] keys of the keyboard to specify
the memory number that you want to recall.
3
Press the [ENTER] button.
The memory has now been recalled.
The setting will be cancelled if you press another button instead of the [ENTER] button.
21
3
For details on customizing (editing) the controller settings, refer to Assign MIDI messages
(EDIT) (p. 58).
If you edit the controller settings of a memory you recall, and want to keep your changes, you
must save the memory before powering down the PCR-M1. For the procedure, refer to Saving
a memory set (SAVE) (p. 86).
PCR-M1_e.book 56 ページ ２００７年２月５日 月曜日 午前１１時１９分