Owner`s manual

63
Use MIDI functionality
● Advanced mode 1–3
Advanced mode 1 of AFTERTOUCH ASSIGN lets you specify the upper and lower limits of the
aftertouch value in addition to the items of Basic mode. Advanced modes 2 and 3 let you specify
an aftertouch message for an individual note (Polyphonic Key Pressure) instead of specifying
the channel.
1. Press the [EDIT] button.
2. Slightly move the controller to which you want to assign an Aftertouch message. In the
case of a button, press that button.
The display will indicate the number of the selected controller.
3. Verify that the display indicates the correct controller, and press the [ENTER] button.
fig.at1
4. Using the ASSIGNABLE FUNCTION keys ( ) on the keyboard, get
“AT0” to appear in the display, then press the [1] - [3] key of the keyboard.
The display will indicate the selected mode.
5. Press the [ENTER] button.
6. Input the channel.
7. Press the [ENTER] button.
8. If you are using Advanced modes 2 or 3, input the note number.
9. If you are using Advanced modes 2 or 3, press the [ENTER] button.
10. If you are using Advanced modes 1 or 3, specify the upper limit and lower limit of the
value as described in Specifying the range of values (upper and lower limits) (p. 64),
and specify the output port.
11. If you are using Advanced modes 1 or 3, specify the output port.( ➝ Specifying the port
(p. 59))
12. If you are making an assignment for a button, specify the button mode.
( ➝ Specifying the button mode (p. 59))
PCR-M1_e.book 63 ページ ２００７年２月５日 月曜日 午前１１時１９分