Owner`s manual

Use MIDI functionality

Specifying the range of values (upper and lower limits)

If in Edit mode you selected an Assign type (p. 58) that lets you specify the range of values, you

will need to specify the upper limit and lower limit of the value.

* Normally, when using Decimal input mode, the value you are specifying appears in the display as a three

digit number. This means that there is no indication of which parameter you are currently entering, so

you may lose track of what you are doing. If this occurs, you can temporarily switch to Hex input mode

to check the parameter that you are now inputting. Then switch back to Decimal input mode and

continue. (

➝

Setting the input mode (p. 51))

fig.max

1. The following display will appear.

2. Use the [VALUE] dial, the [DEC] [INC] buttons, or the [0] - [F] keys to

specify the upper limit.

fig.min

3. Press the [ENTER] button.

The following display will appear.

4. Use the [VALUE] dial, the [DEC] [INC] buttons, or the [0] - [F] keys to

specify the lower limit.

5. Press the [ENTER] button.

*1 Reference

*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or mode

of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently set value,

or will blink if the value is different.

PCR-M1_e.book 64 ページ２００７年２月５日　月曜日　午前１１時１９分